Window Slider Kit Installation - NOBOCOOL NC-49DP User Manual

WINDOW SLIDER KIT INSTALLATION

The window slider kit has been designed to fit most standard "vertical" and "horizontal" window applications. It may
be necessary for you to improvise/modify some aspects of the installation procedures for certain types of
windows. Some window types may require the use of cardboard fillers and/or duct tape to install.
Additional complete window kits may be purchased from NOBO to enable pre-installation in windows in other rooms.
Please refer to illustration for minimum and maximum window openings.
F g i 9 .
Insert Altitude unlimited drawing here – awning window and sliding door Fig 11 and 12
Window slider length
Min. 85cm
Max. 123cm
F . g i 1 1
(Fig. 9, Fig. 10, Fig. 11 and Fig. 12)
Standard door height 210cm.
Gap can be sealed using
cardboard and duct tape.
Additional window sliders
can also be purchased to ll
this gap.
Gaps can be sealed using
cardboard and duct tape.
9
F . g i 0 1
Window (Door) slider height
Max. 123cm
F . g i 2 1
NOBOCOOL NC-49DP/C