1. Manuals
  2. Brands
  3. Controll-A-Door Manuals
  4. Garage Door Opener
  5. MPC-3 MKII
  6. Owner's handbook manual

Controll-A-Door MPC-3 MKII Owner's Handbook Manual

Heavy duty
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

MPC-3 MKII Heavy Duty
OWNER'S HANDBOOK
Congratulations on the purchase of your New Generation B&D Controll-A-Door. This is a sophisticated unit using
the latest microprocessor technology. You will appreciate the many features and high quality built into the product.
ž
Note how to disengage the unit in case there is a power failure and you need to use the door manually. It
is quite easy. See page 3.
ž
If you have a problem with the unit, please check the 'LIGHTS FLASHING' (page 6) or the 'SYMPTOMS
AND REMEDIES CHART' (page 7). You may be able to save yourself a service call.
ž
Don't turn off at the power point, except for servicing.
ž
When going on holidays, it is recommended that the 'SHUTDOWN' button be used rather than turning off
at the power point. See page 2.
ž
Do not allow water, or other liquids, to enter the motor, wall unit or hand transmitter.
ž
Ensure the centre-lift lock on your B&D Roll-A-Door is UNLOCKED before operating your Controll-A-Door.
ž
Please read this booklet and keep it in a safe place for future reference.
WE STRESS THE YOUR B&D CONTROLL-A-DOOR IS NOT A CHILD'S PLAYTHING. BE AWARE OF
WHO MAY USE THE UNIT AND ENSURE THAT IT IS OPERATED WITH CARE AND AS INSTRUCTED.
DISTRIBUTORS
B&D AUSTRALIA
NSW Office:
B&D Australia, 34-36 Marigold Street, Revesby 2212. PO Box 4665, Millperra, NSW 1891. Ph: (02) 722 5555, Fax:
(02) 771 6385.
Qld Office:
(07) 271 2500, Fax: (07) 271 3738.
3137. Ph: (03) 9728 1566, Fax: (03) 9728 3709.
Box 2236, Regency Park, SA 5942. Ph: (08) 340 3411, Fax: (08) 340 0168.
6021. Ph: (09) 344 3333, Fax: (09) 344 3360.
Fax: (004) 31 4769.
B&D New Zealand:
70 Allens Road, East Tamaki, Auckland, NZ. Phone: 0011-64-9-274-5625, Fax: 0011-64-9-274-0845.
B&D Australia is a Division of Clyde Industries (Incorporated in NSW)
B D
Controll-A-Door
&
AUTOMATIC GARAGE DOOR OPENER
SOME HELPFUL HINTS
B&D Australia, 37-47 Cobalt Street, Carole Park 4300. PO Box 300, Goodna, Qld 4300. Ph:
Vic Office:
B&D Australia, 147-153 Canterbury Road, Kilsyth 3137. PO Box 168, Kilsyth, Vic.
SA Office:
Tas:
Tom Moore & Son, 86 Bass Highway, Cooee 7320. Ph: (004) 31 4388,
A.C.N. 000 000 031
TM
B&D Australia, 5 Peekarra Street, Regency Park 5010. Private
WA:
B&D Australia, 225 Balcatta Road, Balcatta

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MPC-3 MKII and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Controll-A-Door MPC-3 MKII

Summary of Contents for Controll-A-Door MPC-3 MKII

  • Page 1 MPC-3 MKII Heavy Duty OWNER'S HANDBOOK Congratulations on the purchase of your New Generation B&D Controll-A-Door. This is a sophisticated unit using the latest microprocessor technology. You will appreciate the many features and high quality built into the product. SOME HELPFUL HINTS ž...

  • Page 2: How To Operate

    Touch to OPEN or CLOSE door. light display. LIGHT BUTTON For Flashing Touch to turn LIGHT ON (when Controll-A-Door is not being operating). Touch again for OFF. Light automatically turns off Lights, see after Controll-A-Door operation. page 6.

  • Page 3: Power Failure

    Your transmitter code will be remembered. Make sure the drive unit is engaged. Press UP.STOP.DOWN (or the hand transmitter). Allow the door to close fully. (This allows the Controll-A-Door to reconfirm it's memory). WARNING: THE AUTOMATIC REVERSING DISENGAGE SYSTEM WILL NOT OPERATE ON THE FIRST DOWN MOVEMENT! If the door is already closed when UP.STOP.DOWN...
  • Page 4 PROGRAMMING When your Controll-A-Door is installed it is 'programmed' by the installer. The programming of the Controll-A-Door sets - (i) the top and bottom limits of door travel and (ii) your own personal hand transmitter code Reprogramming will not normally be necessary unless you wish to change your transmitter code or change the open position of your door.
  • Page 5 MORE ABOUT YOUR CONTROLL-A-DOOR MEMORY AUTOMATIC REVERSING At the heart of your B&D Controll-A-Door is Your B&D Controll-A-Door incorporates a a unique Microprocessor. This stores vital unique reversing system. The Controll-A- information to control the door operation,...
  • Page 6 UP.STOP.DOWN light is on. Controll-A-Door is now operational. The unit has cut out due to motor overload. Check: a) Is the door free from obstructions? Correct fault, PRESS RESET.

  • Page 7: Save A Service Call

    If problem continues Door guides damaged. Repair guides or call your B&D Dealer. Door reverses off floor. Controll-A-Door installation problem. Call your B&D Dealer. Door roll 'grows large' when closing. Door not correctly adjusted. Service door.

  • Page 8: Warranty

    A. The Manufacturer, B&D Australia, a member of the Clyde Group ("B&D") of 34-36 Marigold Street, Revesby subject o the terms set out herein, hereby warrants to the original retail purchaser ("the Buyer") that the B&D Controll-A-Door ('the Unit") including every major component part thereof will be free from defects in materials and workmanship in...

This manual is also suitable for:

Mpc-3 mkii heavy duty

Table of Contents