Settings; Rf-Settings; What" Behaviour; Adjustments - Nordic ID RF601 User Manual

���������������
6.1

Settings

Settings-menu contains functionalities for managing RF-connections. After selecting Settings from the Main Menu, a 4-
digit password is required. Usually only a representative of the system integrator has access to these settings. By default
the password is 0000, entering that and pressing <OK> will open Settings menu.

6.1.1 RF-settings

Channel
In this menu user can choose communication channel from 1 to 7. Note that the channel must be same in the
HOST-computer.
Resending times
How many times a message is sent to the HOST if no answer is received. If the Hand Terminal cannot get a
response from the Base Station, and all the resending times have been used, the transaction failure sign F will
be prompt on the display.
Reception timelimit
The time limit during which the Base Station must respond to the Hand Terminal before the message is resent.
Timelimit can be chosen between 1 – 15 seconds.

"WHAT" Behaviour

In this menu user can choose "WHAT" command behaviour between 2 types: the New and the Old one. The
difference between these is explained in RF6XX System Integrator Guide. The default is 0 (new style).
6.2

Adjustments

This menu contain general settings of the Hand Terminal
Contrast
Key sounds
Volume
Battery type
6.3

Info

This screen shows some basic info about the RF601.
Header
commID
Charmap
Battery
© 2006 Nordic ID Oy
RF601 User Manual
Display contrast (0 - 100%)
0=Off / 1=On
Beeper level and frequency.
0, if NI-CD or NI-MH rechargeable batteries are used. 1, if using normal
batteries.
Device and Firmware version
The communication identification number of the device
Active charactermap in use
Battery charge level indicator
May 2006 Version 1
15