If the auto power save function activates and
shuts off the power, press the main switch again.
4 When you have finished shooting, turn
the camera power off.
1 Press the main switch to turn on the
2 If the LCD monitor is off, press the DISP
button to turn it on.
• Settings other than the shooting distance settings
using the"" /
button and the flash On/Off
settings using the
button cannot be adjusted.
• You can adjust the zoom with the zoom lever.
3 Look at the LCD Monitor and frame the
Press the shutter button halfway and
wait until the upper Indicator shines
green. After it shines, press the shutter
button all the way.
• Make sure that the lens window is always clean.
• Ensure that your fingers do not obstruct the lens
window or flash when shooting.