Switching On/Off; First Time Installation; Aerial Installation; Cable Installation - Philips TV User Manual

Switching On/Off

To Switch the TV On
• Connect the power cord to the 220-240V AC, 50 Hz.
• Then the standby LED lights up.
• To switch on the TV from standby mode either:
• Press the " " button, CH- or CH+ or a numeric
button on the remote control.
• Press the control switch left side of the TV. The TV
will then switch on.
Note: If you switch on your TV via CH- or CH+ buttons on
the remote control or on the TV set, the programme that you
were watching last will be reselected.
By either method the TV will switch on.
To Switch the TV Off
• Press the " " button on the remote control or hold
the control switch on the TV until shut down , so
the TV will switch to standby mode.
• To power down the TV completely, unplug the power
cord from the mains socket.
Note: When the TV is switched to standby mode, the standby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer is active.

First Time Installation

When turned on for the rst time, language selection
screen is displayed in all language options listed
alphabetically. Press the " " or " " button to
highlight the required language, press OK button to
select. "First Time Installation" appears. Use " " or
" " button to set the required country, and press " "
button to select Search Type. Use " " or " " to set
the desired search type. Available search types are
Digital and analog, digital only and analog only. When
set, press " " to select Teletext Language. Use " "
or " " to select the desired Teletext Language. Next,
select Scan Encrypted and set as Yes if you want to
scan coded stations. Press OK button on the remote
control to continue and the search type screen will be
displayed. You must select a search type to search
and store broadcasts from the desired source.
IMPORTANT: When you select Country option as
France or Italy, you will be asked to set and con rm
a PIN number. Selected PIN number cannot be 0000.
Enter a PIN number and con rm it by entering once
more. Press OK button to continue. If the two PIN
numbers match, your master PIN number will be set.
WARNING: When you are required to enter a PIN
number for any menu operation you should use the
PIN that you have previously de ned during the rst
time installation. If you have forgotten the PIN number
you have set during the rst time installation, you
should use the master PIN code, 4725.

Aerial Installation

If you select AERIAL option from the Search Type
screen, the television will search for digital terrestrial
TV broadcasts.
NOTE: You can press
After all the available stations are stored, Channel
List will be displayed on the screen. If you like the
sort channels, according to the LCN (*), please select
"Yes" and than press OK.
Press " " button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence (if available).

Cable Installation

If you select CABLE option and press OK button on the
remote control to continue. To continue, please select
YES and press OK. To cancel operation, select NO and
press OK. You can select frequency ranges from this
screen. For highlighting lines you see, use " " or " "
button. You can enter the frequency range manually by
using the numeric buttons on the remote control. Set
Start and Stop Frequency as desired by using numeric
buttons on the remote control. After this operation, you
can set Search Step as 8000 KHz or 1000 KHz. If you
select 1000 KHz, the TV will perform search process in
a detailed way. Searching duration will thus increase
accordingly. Depending on your Country selection in
the rst time installation, 250KHz search step option
might be available on Network Channel Scan screen.
Note that if you perform the search with 250KHz option,
search process could take a longer time.
Additionally, for some countries, Network ID option
will be available. Network ID feature gets the Network
Information Table. This table provides information on
the selected network. It may change according to the
operator and the region where that operator actively
broadcasts.When nished, press OK button to start
automatic search. The TV will search and store available
broadcasts.
English - 5 -
" "
button to cancel.