Settings Menu Contents; Install And Retune Menu Contents - Philips TV User Manual

Controls conditional access modules when available.
Conditional Access
Con gures language settings (-may change depending on the country selected)
Preferred and current settings will be available. Current settings can be changed
Language
only if the broadcaster supports.
Con gures parental settings.
Parental
Sets timers for selected programmes. / Sets sleep timer to turn off the TV after
Timers
a certain time.
Displays recording con guration menu.
Recording Confi guration
Sets date and time.
Note:
* The TV takes the time info via the broadcast. Correct time will be available on
Date/Time Settings, if the time info is provided in the broadcast.
If the TV is in no channel mode, Date/Time settings can be changed. However,
if there is a channel preset, only "Time Settings Mode" can be changed and if
Date/Time this is set to Manual, Time Zone will be enabled.
* If the TV is switched to standby mode and switched on later and there is no
broadcast available, time information will not be updated. If there is a present
broadcast; however, time information will be taken via the broadcast. In other words,
time information will be available according to these priorities: The TV rst looks for
the time info in the broadcast, then to the user preference, and lastly to the teletext
time information.
Enables or disables selected source options.
Sources
Displays automatic tuning options.
Digital Aerial: Searches and stores aerial DVB stations.
Digital Cable: Searches and stores cable DVB stations.
Automatic Channel
Analogue: Searches and stores analogue stations.
Scan (Retune)
Digital Aerial & Analogue: Searches and stores aerial DVB and analogue
stations.
Digital Cable & Analogue: Searches and stores cable DVB and analogue
stations.
This feature can be used for direct broadcast entry.
Manual Channel Scan
Searches for the linked channels in the broadcast system..
Network Channel Scan
You can use this setting for ne tuning analogue channels. This feature is not
Analogue Fine Tune
available if no analogue channels are stored.
Deletes all stored channels and settings, resets TV to factory settings and starts
First Time Installation
section for more information on this process.
(*) Visible for Denmark, Sweden, Norway or Finland. Clear Service List and then
press OK. The following OSD will be displayed on the screen. Select YES and
Clear Service List
press OK to continue or select NO and press OK button to cancel.
Other Settings: Displays other setting options of the TV set:
Changes timeout duration for menu screens.
Menu Timeout
When this setting is on, search process will locate the encrypted channels as well.
If it is set as Off, encrypted channels will not be located in automatic search or
Scan Encrypted
manual search.
TV Menu Features and Functions

Settings Menu Contents

Install and Retune Menu Contents

rst time installation. You can follow the instructions in the Initial Installation
English - 9 -