Table of Contents
Advertisement
SENSOR
TYPE
IEE 802.3af POE
STATUS
4-6. Setup – STORAGE Mode
In the SETUP menu, select the STORAGE tab and the STORAGE menu appears, as pictured below.
Navigate through the menu items using the mouse or the buttons on the remote control and change the
value of the menu items.
Item
OVERWRITE
Select sensor number from 1 to 4
Set the type of sensor for the specified channel. Options are: OFF, N/O
(normally open) and N/C (normally closed).
PSE (Power Sourcing Equipment) Status Monitoring Menu
Figure 4.6.1. STORAGE Setup Screen
Table 4.6.1. Menu Items in STORAGE Setup Screen
When enabled, the NVR continues recording and overwrites the oldest existing
recorded data once the hard drive is full. When disabled, recording stops when the
hard drive is full.
Description
31
Advertisement
Table of Contents
