Connect Button - Ecleree AMIC24 User Manual

"Reset" button cancels the current password if you lost or forgot it (see CONNECT button
section).
During the updating process, a progress dialog box is displayed to provide feedback of the
operation progress.
If an error occurs at any time during these operations, a warning message appears in a dialog
box to inform the user.

5.8.2. CONNECT button

CONNECT button is used to open/close a
connection between AMIC24 and the software.
When .amiclab2 is not connected with
AMIC24, CONNECT button is deactivated and
greyed. On the other hand, when .amiclab2 is connected with the hardware, the button is lit in variable
intensity red signalling its active status.
In order to avoid clicks and noise when communication is established software mutes the sound
the time for the parameters to be send from the editor (with their current value).
If hardware is password protected, a password dialog box opens to type the password and
validate the operation.
13