Selectors; Menus; Numerical Values; Title Bar - Ecleree AMIC24 User Manual

5.4. Selectors

Some parameters are set using drop-down
value lists. These controls display a down arrow on
their right.
In order to choose a new value in the list,
click on the control and a list will appear with all
available values.
left-clicking on it. The list will close and the control
will be set with the new value.

5.5. Menus

Menus are graphic objects operating like
selectors.
The only difference is that menus may have
some greyed ("non-available") items (depending on
the current mode).

5.6. Numerical values

In .amiclab2 several already mentioned controls
have a combined display for numerical values. This
display also allows editing of the parameter value.
In order to edit a numerical value, you just have
to point and left-click on it. The control automatically
enters the edit mode allowing to type the desired value
on keyboard (only numbers, don't type units).
Once editing is done, press ENTER to update
the control. Pressing ESC cancels the editing and previous value is kept.

5.7. Title bar

Title bar is a typical Windows® program title bar. Edited preset name appears on far left (here
working .ami). Buttons on far right of the title bar minimize and maximize the window, and exit program.
Program name is written near these buttons.
The title bar (except the buttons surface) may be used to move the rack anywhere on the screen
(cursor displays as crossed arrows).
In addition to the exit button, Windows® standard Alt+F4 key shortcut can be used to exit
program.
10
Select the new value by