System Board - HP dv6500 Entertainment Maintenance And Service Manual

Disconnect the USB cable (3) and the power connector cable (4) from the USB/power connector
3.
board.
Remove the USB/power connector board.
4.
Reverse this procedure to install the USB/power connector board.

System board

Description
System board (includes modem cable)
Before removing the system board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Switch cover (see
c.
Keyboard (see
d.
Speaker assembly (see
e.
Display assembly (see
f.
Battery on page 37).
Hard drive on page 42)
Optical drive on page
Switch cover on page
Keyboard on page 55)
Speaker assembly on page
Display assembly on page
49)
51)
53)
58)
Component replacement procedures
Spare part number
446477-001
71