Other Features; Set Alarm Timer - Philips MCM2005 User Manual

» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» RDS clock
» Frequency
Synchronize clock with RDS
You can synchronize time shown on the unit
with that on the RDS station.
1
Tune to an RDS radio station that
transmits time signals.
2
Press RDS for over 2 seconds.
» [CT SYNC] is displayed and the unit
reads RDS time automatically.
» If no time signal is received, [NO CT]
is displayed.
Note
•
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
13 EN

6 Other features

Set alarm timer

This unit can be used as an alarm clock. You can
select [DISC], [TUNER] or [USB] as the alarm
source.
Note
•
Make sure that you have set the time correctly.
1
In standby mode, press and hold
SLEEP/TIMER until [TIMER SET] (timer
set) scrolls on the display.
» [SELECT SOURCE] (select source)
then scrolls on the screen.
2
Press SOURCE repeatedly to select a
source: [DISC], [USB], or [TUNER].
3
Press SLEEP/TIMER to confirm.
» The hour digits are displayed and begin
to blink.
4
Press / repeatedly to set hour.
5
Press SLEEP/TIMER to confirm.
» The minute digits are displayed and
begin to blink.
6
Repeat step 4 to 5 to set minute and
volume.
» Alarm is set, and
Activate/deactivate alarm timer
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate timer.
» If timer is activated,
is displayed.
is displayed.