Connect Fm Aerial; Connect Power; Prepare The Remote Control - Philips MCM2005 User Manual

Connect FM aerial

Tip
•
For optimal reception, fully extend and adjust the
position of the antenna.
•
For better FM stereo reception, connect an outdoor
FM antenna to the FM AERIAL socket.
•
The unit does not support MW radio reception.
Connect the supplied FM antenna to the FM
socket on the back of the main unit.

Connect power

Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•
Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•
Before you connect the AC power cord, ensure that
you have completed all other connections.
9 EN
FM
Connect the power cable to the wall socket.

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine, or fire. Never discard batteries in fire.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Note
•
If you are not going to use the remote control for a
long time, remove the batteries.
•
Do not use old and new or different types of batteries
in combination.
•
Batteries contain chemical substances, so they should
be disposed of properly.
•
During operation, always point the remote control at
the IR sensor.
a
b
c