D-Link DCS-932L User Manual page 49

Section 5 - Security
ortant: Some ISPs block access to port 80 and other commonly used Internet ports to conserve bandwidth. Check with your ISP so that you can open
the appropriate ports accordingly. If your ISP does not pass traic on port 80, you will need to change the port the camera uses from 80 to something else,
such as 800. Not all routers are the same, so refer to your user manual for speciic instructions on how to open ports.
Enter valid ports in the Virtual Server section of your router. Please make sure to check the box next to the camera name on the Virtual Server List
to enable your settings.
D-Link DCS-932L User Manual 49