IBM RELEASE 7.3 Management Manual page 204

Disabled - The device is locked, which makes it unavailable for use by HPSS.
•
Unknown - The state of the device is not known to SSM; this is usually caused by the controlling
•
Mover being down or disconnected from SSM.
Device Admin State. The current administrative state of the device, as reported by its controlling Mover.
The possible states are:
Locked - The device is locked and unavailable for use by HPSS.
•
Unlocked - The device is unlocked and available for use by HPSS.
•
Unknown - The state of the device is not known to SSM; this is usually caused by the controlling
•
Mover being down or disconnected from SSM
Mover. The descriptive name of the Mover that controls the device.
Mover Host. The host name of the Mover node (the node where the Mover runs).
Drive Address. The name used by the PVL/PVR to access the drive.
Drive Flag. This field describes possible actions that the PVL needs to perform for the drive. Possible
flags are:
Clear - Nothing needs to be done.
•
Modified - Set by SSM when the drive has been modified. It was added for a future feature;
•
currently unsupported.
PVR/Mover Notify Pending - The PVL needs to notify the associated PVR and Mover that the
•
drive has been created or deleted.
PVR Notify Pending - The PVL needs to notify the associated PVR that the drive has been
•
created or deleted.
Mover Notify Pending - The PVL needs to notify the associated Mover that the drive has been
•
created or deleted.
Abort PVR/Mover Notify – The PVL is aborting a pending notification.
•
Drive State. The current operational state of the drive, as reported by the PVL. The possible states are:
Enabled - The drive is working normally.
•
Disabled - The drive is not available for use by HPSS. This can occur if the drive is locked by an
•
SSM user, or if an error occurred when mounting or dismounting a cartridge on the drive.
Broken - The PVL itself has detected a fatal error, and is shutting itself down.
•
Unknown - The state of the device is not known to SSM; this is usually caused by the PVL being
•
down or disconnected from SSM.
Drive Admin State. The current administrative state of the drive, as reported by the PVL. The possible
states are:
Locked - The drive is locked and unavailable for use by HPSS.
•
Unlocked - The drive is unlocked and available for use by HPSS.
•
HPSS Management Guide
Release 7.3 (Revision 1.0)
November 2009
204