Table of Contents
Advertisement
from the MediaHighway programme
guide due to the large amount of
information. Users can set the receiver
to access the MediaHighway programme
guide when the receiver turns on, to
save time. Press the FAV button and set
Start MHW-Epg Automatic to On.
Note
The MediaHighway programme guide may be not
available, depending on the country.
A long-term programme guide needs
more memory space, which may reduce
the receiver's performance. Use a flash
drive to save memory space. Press the
FAV button, choose Save EPG Data to
Device, and then determine which USB
port's flash drive to use for saving of
programme guide information.
4.3 Controlling Audio
When watching a channel, press the
yellow button to control audio using
these options:
• Audio Track: A TV programme may pro-
vide audio in two or more languages.
16
Choose a different audio language if
available.
• Sound Mode: Generally, an audio track has
two sound channels. Determine which
sound channel to use.
• Sound Level: The volume may vary de-
pending on channel. Use this to make
the volume even at every channel. With
this set to High, for example, the volume
is automatically adjusted to the level
that is higher 30% than the current
channel's.
4.4 Displaying Subtitles
When the subtitle symbol
is high-
lighted on the programme information
dialogue box, it indicates that subtitles
are available in one or more languages
for the current programme. Press Sub-
title button and choose a subtitle lan-
guage to display subtitles.
4.5 Watching Two Channels
Simultaneously
Users can simultaneously watch two
different channels contained in the
same transponder, with one channel
shown in an inset window. It is also pos-
sible to watch a channel while playing a
recording.
Note
Be aware that it is not possible to simultaneously
watch channels that are not contained in the same
transponder.
Press PiP button, and a window appears
at a corner of the screen, displaying
another channel. Pressing PiP button
again displays the two pictures side
by side at the same size. To close the
window, press PiP button again.
Change channels for the foreground picture:
Press the PiP S. List button and select
a channel from the channel list that
appears.
Swap the background picture with the
foreground picture: Press PiP Swap button.
Change the location of the foreground picture:
Press the Page up or Page down button.
4.6 Viewing Teletext
The teletext symbol
highlighted on
the programme information dialogue
box indicates that teletext pages are
Advertisement
Table of Contents
