Installing The Battery In Terminals Without A Battery Door Lock - Honeywell Dolphin 70e Black User Manual

Installing the Battery in Terminals without a Battery Door Lock

The terminal is shipped with the battery packaged separate from the unit. Perform the steps illustrated
below to install the battery.
Note: If your Dolphin 70e Black model does not have a battery retention strap, refer to the battery installation
instructions on page 2-2.
Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause
damage not covered by the warranty.
2
For information on how to remove the battery, see
1
3
Battery
Retention
Strap
6
8
Replacing the Battery
Note: Standard battery and standard battery door shown.
5
4
7
9
on page 2-14.
2 - 3