Adjusting The Headlight Beams - Yamaha Vector RS90LTGTZ Owner's Manual

Periodic maintenance and adjustment
1. Screw
1. Screw
2. Headlight access panel
3. Disconnect the headlight coupler.
4. Remove the bulb holder cover.
1. Headlight coupler
2. Bulb holder cover
5. Unhook the bulb holder by pushing it in,
then clockwise.
68
1. Bulb holder
6. Remove the bulb.
7. Install the new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE: Keep oil and your hands
away from the glass part of the bulb or
its life and illumination will be affect-
ed. If the glass is oil stained, thor-
oughly clean it with a cloth moistened
with alcohol or lacquer thinner.
1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
8. Install the bulb holder cover, and then
connect the headlight coupler.
9. Install the headlight access panel and the
top cover.
ESU12270

Adjusting the headlight beams

1. Remove the top cover. (See page 42 for
removal procedures.)
[ECS00621]