Reconyx RapidFire Instruction Manual page 9

CompactFlash
The CompactFlash (CF) card is used to store the pictures your camera
captures. These images may be transferred to your computer using standard
image viewing software or RECONYX MapView or BuckView™ mapping
and image management software.
Inserting and Removing the CompactFlash Card
Insert CF card as shown. Make sure the orientation is correct and that
the card is aligned properly. Then press gently to seat the card in the
holder.
To change CF cards in the field:
1. Press <OK> to disarm (the camera will then show status – i.e.
battery status and number of pictures since last armed)
2. Turn the power off.
3. Remove the card by pulling it straight out of the receiver port.
4. Insert the new CompactFlash card into the receiver slot under the
control buttons as shown.
5. The card must be inserted face up with the connecting ports in
first.
Note: Always disarm (by pressing OK) and turn the power off before
removing or inserting the CompactFlash card.
www.reconyx.com
(CF) Card Specifications and Installation
®
9