Initial Setup & Programming - Reconyx RapidFire Instruction Manual

Initial Setup & Programming
With the CF card inserted in the camera, turn your camera on using the
On/Off switch. If this is the first time you've used your camera, it will
automatically display the Date/Time setup change option, beginning with
Enter Year.
Press the << and >> buttons to set the date (year, month, and day) and time
(hour and minute); press the OK button after each part of the date and time
are correct.
Your RECONYX RapidFire camera comes pre-programmed with factory
TM
default settings. By default the camera will take 3 pictures per trigger with a
1 second pause between pictures and no delay between triggers.
If you wish to change your camera's settings you can do so easily in the field
at any time. Changes are made using the control buttons and display that
are located under the Removable Cover. Once you make selections, they
are retained by the camera – even when the camera is off and the batteries
are removed – so that you don't need to make selections again unless you
want to change something.
Additional features that are available on the Professional Series cameras are
available through the Configuration Software on your CD. See the
Configuration Software Help file for more information.
www.reconyx.com 11