3. Operation; 3.1. Making A Call; 3.2. Answering A Call; 3.3. The Redial Function - Telkom Big Button Instruction Manual

2. Set the minute
Press Set button once, the current minute setting will appear and the LCD
will flash. The second setting will automatically reset to 00. Press and hold
TIME button. Release the TIME button when the LCD shows the correct
minute. Press the SET button again to complete the set-up procedure.

3. OPERATION

3.1. Making a call

1. Lift the handset. The LCD will clear.
2. When you hear a dial tone, dial the number. The LCD will show the number
that you dialed. If you dial a number more than 16 digits long, it will
display the last 16 digits only.
3. Once you have completed the call, replace the handset.

3.2. Answering a call

1. When you receive a call, the telephone will ring and the ringer LED will
flash. Lift the handset.
2. Once you have completed the call, replace the handset.

3.3. The Redial Function

To quickly dial the last dialed number, press the REDIAL button.
1. Lift the handset
2. Press the REDIAL button.
If you press the REDIAL button during dialing, this button does not function as
REDIAL but as a PAUSE. The PAUSE function inserts a pause during dialing or
storing a number in memory. This is a convenient feature for electronic banking
or dialing from certain PABX systems where a short delay is required between
digits to pick-up an external line.

3.4. The Pause function

By pressing the REDIAL button after any digit is pressed you can insert a pause
in a string of digits e.g. for memory dialing.
Page 4