Replacing The Camera Module - Dell Inspiron 17R Owner's Manual

Replacing the Camera Module

Procedure
1 Connect the camera cable to the camera-module connector and secure it with the
tape.
2 Use the alignment posts on the display cover to place the camera module in
position and adhere the camera module to the display cover.
3 Align the screw holes on the display panel with the screw holes on the display
cover.
4 Replace the screws that secure the display panel to the display cover.
Postrequisites
1 Replace the display bezel. See "Replacing the Display Bezel" on page 65.
2
Replace the display assembly. See "Replacing the Display Assembly" on page 63.
3 Replace the palm rest. See "Replacing the Palm Rest" on page 41.
4 Follow the instructions from step 4 to step 5 in "Replacing the Optical Drive" on
page 29.
5 Replace the base cover. See "Replacing the Base Cover" on page 20.
6 Replace the keyboard. See "Replacing the Keyboard" on page 18.
7 Replace the battery. See "Replacing the Battery" on page 13.
8 Follow the instructions in "After Working Inside Your Computer" on page 11.
74
| Camera Module