Installation - iTronics iPASS BLACK ITB-70 User Manual

Installation

REC
10
1. Open the SD memory card protection cover and insert the SD memory card
into the slot. Then close the cover.
2. Put the mounting cradle on the main unit and push forward it as shown on the
left picture. You can hear the click sound if the mounting cradle fixed properly.
3. Remove the protection film attached on the camera lens.
4. Remove the film of the adhesive tape on the cradle and take a proper posi-
tion on the windshield temporarily as shown on the left picture. If it is fine for
recording, fix the cradle tightly with more pressure.