Using The Radio; Manual Tuning; Automatic Presetting; Selecting The Preset Channels - Panasonic SC-PT150 Operating Instructions Manual

Using the radio

Manual tuning

1
To select "FM".
(main unit)
2
To select "MANUAL".
(main unit)
3
To select the frequency.
(main unit)
Press and hold [4 TUNING 3] until the frequency
starts scrolling to start automatic tuning. Tuning stops
when a station is found.
Presetting the channel
Remote control only
Up to 30 stations can be set for FM.
1.
While listening to the radio broadcast
Press [ENTER].
2.
While the frequency and "PGM" are fl ashing on the
display
Press the numeric buttons to select a channel.
• To select a 2-digit number
Example: To select 12,
• Alternatively, press [4, 3], then press [ENTER].
The station occupying a channel is erased if another
station is preset to that channel.
26
RQT8043
OR
(remote control)
OR
(remote control)

Automatic presetting

1
To select "FM".
OR
(main unit)
2
Press and hold.
OR
(main unit) (remote control)
The tuner tunes to the lowest frequency and starts to
preset all the stations it can receive into the channels
in ascending order.
• "SET OK" is displayed when the stations are set,
and the radio tunes to the last preset station.
• "ERROR" is displayed when automatic presetting
is unsuccessful. Preset the channels manually
(\ see left).

Selecting the preset channels

1
To select "FM".
2
To select the channel.
TO
• Alternatively, press [4, 3].
When a stereo FM broadcast is being received,
"ST" lights in the display.
If noise is excessive in FM
Main unit only
Press and hold [– FM MODE] to display "MONO".
Press and hold [– FM MODE] again to cancel the mode.
The mode is also cancelled when you change the
frequency.
(remote control)
Release the button
when "FM AUTO" is
displayed.