Preparation before Operation
■ To set the clock
1. Press
• "
" is displayed.
• "
" and "
2. Press
week.
3. Press
• "
" blinks.
4. Press
time.
• Holding down
the time display.
5. Press
• Point the remote controller at the indoor unit when
pressing the buttons.
• " " blinks.
■ Turn the breaker on
• After the power is turned on, the flaps of the indoor unit opens and closes once to set the
reference position.
NOTE
■ Note on setting the clock
• If the indoor unit's internal clock is not set to the correct time, ON/OFF TIMER and
WEEKLY TIMER will not operate punctually.
8
.
" blink.
to set the current day of the
.
to set the clock to the present
or
rapidly increases or decreases
.