Table of Contents
Advertisement
REPAIR & MAINTENANCE
Installation of the Diamond
Bits:
Prior to the installation of the diamond bit it
is important that both the machine adapter
and the diamond bit are cleaned and
greased.
Mount the bit with the flat side opposing
the locking screw.
Secure the bit using the socket head
screwdriver
Remove the socket head screwdriver.
Removal of the bit is done in reverse
order. After use dry and lubricate the bit
before putting it back into the original
packing.
Before changing tools always unplug the
machine
Ventilation openings in the
housing of the machine
The ventilation openings must be free
from objects such as Styrofoam, stone or
concrete debris. Remove these objects
before using the machine. If the ventilation
openings are not clear it will mean that the
cooling of the motor is diminished and can
damage the machine.
There is a small hole in the water injection
head located behind the connecting valve
for the water hose. When there is water
coming out this small hole it is recommen-
ded that you stop using the machine and
contact your local service center.
Continuing to use the machine can result in
damage to your machine
Storage after Use
The machine should be kept in a dry place
and kept out of the reach of children
Defects and Faults
Contact you local DalTile store for repair
work. They can direct you to a service
center.
DALTILE DAD2 OPERATING MANUAL V09/2005R1 PAGE 11
Advertisement
Table of Contents
