Siemens Gigaset S450 IP User Manual page 14

The necessary general access data for your
VoIP provider is downloaded and saved on
the phone.
If the data for your VoIP provider is not offered
as a download, press the display key ".
You can then carry out the following steps as
instructed by the connection assistant.
You must then make the necessary settings for
the VoIP provider with the Web configurator
(page 33). Your VoIP provider will supply you
with this data.
Entering user data for your first
VoIP account
Enter the VoIP user data for the first VoIP
account. Your VoIP provider will supply
you with this data.
Using the Web configurator, you can later
enter five further VoIP accounts (VoIP phone
numbers) set up with the same VoIP provider.
Your phone can then (together with your fixed
network number) be reached under up to
seven different phone numbers. You can
assign the phone numbers to individual hand-
sets registered with the base station
(page 32).
Username:
If this is required by your pro-
vider, enter the user name and
press
§Save§
Authent. Name:
Enter the registration name
and press
Authent. Password:
Enter password and press
.
§Save§
Please note:
Please note when making these entries that
the VoIP user data is case sensitive. When
entering text, the first letter is capitalised as
standard. Press and hold the # key if neces-
sary to switch between upper/lower case text
and numerical entry.
.
.
§Save§
If you have made all the necessary entries,
the Gigaset.net wizard is started. You have
the option of entering yourself in the
Gigaset.net online directory with a name.
This step is only carried out when you are
getting started (when the connection assistant
is started up for the first time). You can also
create the entry via the Gigaset.net directory
(page 21).
For more information on this, please see
the full user guide on the Internet at:
www.siemens.com/gigaset.
Completing the VoIP settings
Once you have made all the necessary
entries, the message
plete" is displayed. The handset returns to
idle status.
If all the settings are correct and if the
phone can make a connection to the VoIP
server, then the internal name of the
handset will be displayed (example):
Ð V
INT 1
10.08.06 09:45
FixedLine
You can now use your phone to make calls
via the fixed network (fixed line) and the
Internet! Callers can reach you on your
fixed network number and your VoIP
number!
Please note:
To ensure that you can always be reached via
the Internet, the router must be permanently
connected to the Internet.
First Steps
"Connection data com-
IP
13