Wiper Blades And Washer Fluid - Volvo XC70 Owner's Manual

Wiper blades
Service position
In order to change, clean or lift the wiper blades
(for scraping off ice from the windscreen) they
must be in service position.
1. Turn the remote control key to key position
0, see page 74, and keep the remote con-
trol key in the ignition switch.
2. Move the right-hand stalk switch up for
about 1 second. The wipers then move to
standing straight up.
The wipers return to the starting position when
the car is started.
Replacing the wiper blades
07 Maintenance and service

Wiper blades and washer fluid

Lift up the wiper arm. Press the button
located on the wiper blade mounting and
pull straight out parallel with the wiper arm.
Slide in the new wiper blade until a "click"
is heard.
Check that the blade is firmly installed.
NOTE
The wiper blades are different lengths. The
blade on the driver's side is longer than the
blade on the passenger side.
07
``
275