ILDV20/30/40 Fireplace Insert
VeNtiNG RequiReMeNtS
•
Make sure the exhaust pipe on heater connects to exhaust
portion of cap. Attach flex liners. Figure 6
•
Do not crimp or rupture liner when bending it into chimney
offsets.
•
The exhaust vent must reline the entire length of chimney and terminate above chimney top.
•
Vent must meet all vent manufacturer's requirements when installed.
•
Make sure you have the following before installing unit:
•
3" and 3" UL 1777 Listed gas liner for air inlet and exhaust.
•
Vertical Terminations kits:
iLDV20/iLDV30: HEDV3T81, HEDV3T11, HEDVRT, AI31TK33A
iLDV40: HEDV3T81, HEDV3T11, HEDVRT
Figure 6
Venting Unit
1
Inlet
Exhaust
FP1922
vent requirements
9/08
Maximum Height 40'
(1.9 m)
Minimum Height 10'
(3 m)
FP19
VeNtiNG iNStALLAtiON
83D0511