Updating the Firmware
The following describes how to update the firmware of the AVeL Link Player.
* The AVeL Link Player must be able to connect to the Internet.
Press the POWER button on the AVeL Link Player.
1
* It takes several seconds for the AVeL Link Player to
power up.
Press the SETUP button on the remote controller, select FW Update, and then press
2
the ENTER button on the remote controller.
Follow the on-screen instructions.
3
Point!
Never turn off the power while the firmware is being updated. Doing so may cause
●
damage to the hardware.
Powering Up the AVeL Link Player
Select.
POWER button
Press.
Select.
78