I-O DATA SRDVD-100U User Manual page 69

●
Function2: Real-Time Transcoding
System Required: Higher
- CPU: Pentium 4 2.4GHz or faster (3GHz Recommend)
- Memory: 256MB or over
LinkPlayer supports major codec files (DivX, MPEG, WMV...). However a lot of codec files are exist in a market. You
might use a Windows Media Player with some codecs, if so, this functions should help you to enjoy more! You don't
need anymore transcoding to playback by LinkPlayer.
In order to go this window, you need to choose "Server Configuration(S)" from Options menu on that setup window.
Enable Resume(R)
(Only available for *.mpg)
Enable Video Transcode
Bit Rate
Buffer Time
Video Transcode *.avi, too(A)
Restrict connection by MAC address
Share Playlist with other Server
Reference on AVeL Link Advanced Server
It is a similar to "Bookmark" function. This function
remembers the latest video file stopped flame, and it can
playback it at this point on the next play order. MPEG only is
supported.
The video transcoding on / off.
Set the trasncoded MPEG2 video bit rate.
Set a buffering time before transcoding
If you want to play the avi files (DA-AVI file or etc.) what
need transcoding, you need to check it on.
You can set the limited access by MAC address.
You can share this playlist (on Advanced Server) with other
PC servers.
６７