Sharp LC-32LE250M Service Manual page 8

LC-32LE250M
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from
being damaged.
1
Con-rm the screws supplied with the TV.
Screws ( m 4)
(used in step 3)
2
Insert the stand base guide pins to the
stand holes on the rear of the TV. ( 1 )
• Make sure the symbol on the stand base
is parallel with the triangle symbol located
at the back of the TV.
3
Insert and tighten the 4 screws into the 4 holes
on the rear of the stand assembly.( 2 )
NOTE
• To detach the stand, perform the steps in reverse order.
• The TV position setting is set to 7 backward after attaching
the stand.
• Do not remove the plastic wrap before attaching the stand
base to protect it from scratches.
• The bottom area of the set (curvy area) must be beyond the
table's edge to prevent the TV from damage.
Screw driver
Soft cushion
Screw
Guide pin holes
3 – 3
Stand base
guide pins