Sharp LC-32LE250M Service Manual page 14

LC-32LE250M
6) Let the process running & entering verification.
Do not power off
Verifying
.........................
Verify Pass
7) Software is successfully installed when the following appears at the end of the process.
Please re-boot the system
Update Finished
8) Plug off the LCD TV and plug ON again as usual.
9) LCD TV is running with the latest software.
LCD TV ADJUSTMENT ITEM
1. EDID DATA INPUT
No need to input EDID
2. SIGNAL ADJUSTMENT
A. PICTURE ADJUSTMENT
Confirmation of signal from generator (setting to spec level)
PAL Composite signal
15K Component signal (50Hz)
33K Component signal
a) Adjustment Mode
ITEM
1 Adjustment Mode
• 0.7Vp-p
• Y level • 0.7Vp-p
• 0.7Vp-p : 0.7Vp-p
Pb, Pr level
• Y level • 0.7Vp-p
• 0.7Vp-p
Pb, Pr level
CONDITION
Press the test key at the test remote control
6 – 2
+
0.02Vp-p (pedestal to white level)
–
+
0.02Vp-p (pedestal to white level)
–
+
0.02Vp-p
–
+
0.02Vp-p (pedestal to white level)
–
+
0.7Vp-p 0.02Vp-Com
•
–
PROCEDURE