1. Manuals
  2. Brands
  3. Conceptronic Manuals
  4. Network Router
  5. C150APRA2
  6. User manual

Conceptronic C150APRA2 User Manual

Wireless adsl modem router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CONCEPTRONIC C150APRA2
This user manual gives you a step-by-step explanation of how to install and use the Conceptronic
wireless ADSL modem router.
When you need more information or support for your product, we advise you to visit our Service &
Support website at www.conceptronic.net/support and select one of the following options:
FAQ
: Frequently Asked Questions database
Downloads
: Manuals, Drivers, Firmware and more downloads
Contact
: Contact Conceptronic Support
For general information about Conceptronic products visit the Conceptronic website at
www.conceptronic.net.
The information in this quick installation guide is based on Windows 7 and Vista, but can differ from
your computer when you are using a different operating system.
Conceptronic C150APRA2
Extended User Manual
Congratulations on the purchase of your
Conceptronic wireless ADSL modem router.
1
ENGLISH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C150APRA2 and is the answer not in the manual?

Questions and answers

Related Manuals for Conceptronic C150APRA2

Summary of Contents for Conceptronic C150APRA2

  • Page 1 Congratulations on the purchase of your Conceptronic wireless ADSL modem router. This user manual gives you a step-by-step explanation of how to install and use the Conceptronic wireless ADSL modem router. When you need more information or support for your product, we advise you to visit our Service &...

  • Page 2: Table Of Contents

    CONCEPTRONIC C150APRA2 ENGLISH Table of contents Introduction Safety Precautions Features Package contents The wireless ADSL modem router explained Front panel Back panel Hardware Installation DSL (Telephone) port LAN port(s) Configuring the computer Configure your IP address Checking your connection Modem router configuration...

  • Page 3: Frequently Asked Questions

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.10 Advanced – Network Tools 5.4.10.1 Advanced – Network Tools – Port Mapping 5.4.10.2 Advanced – Network Tools – IGMP Proxy 5.4.10.3 Advanced – Network Tools – IGMP Snooping 5.4.10.4 Advanced – Network Tools – UPnP 5.4.10.5 Advanced –...

  • Page 4: Introduction

    ENGLISH 1. Introduction The C150APRA2 supports multiple line modes. It provides four 10/100 base-T Ethernet interfaces at the user end. The device provides high speed ADSL broadband connection to the Internet or Intranet for high-end users, such as net cafes and office users. It provides high performance access to the Internet, downstream up to 24 Mbps and upstream up to 1 Mbps.

  • Page 5: Features

     Restore to the factory defaults  DNS Package contents The following items are present in the package of the Conceptronic wireless ADSL modem router:  Conceptronic wireless ADSL modem router (C150APRA2)  Antenna for wireless connections  Power supply 12V DC, 800mA ...

  • Page 6: The Wireless Adsl Modem Router Explained

    CONCEPTRONIC C150APRA2 ENGLISH 2. The wireless ADSL modem router explained Front panel Description Status Status Explanation Power LED Power is OFF ON - GREEN Power is on and the initialization is normal ON - RED Device is initiating ON - FLASHING Firmware is upgrading...

  • Page 7: Back Panel

    CONCEPTRONIC C150APRA2 ENGLISH Back panel Description Explanation Antenna connection Connect the included antenna to the modem router. DSL port Connect your ADSL line to the modem router. LAN ports (1 – 4) Connect your computer(s)/network device(s) to the modem router.

  • Page 8: Hardware Installation

    ADSL line from interfering with regular telephone services. Not using such a splitter could lead to connection problems or bad performance. Note: The C150APRA2 is not delivered with a splitter for the ADSL connection. Please contact your telephone or internet provider for the correct ADSL splitter.

  • Page 9: Configuring The Computer

    4. Configuring the computer Configure your IP address The C150APRA2 is equipped with a built-in DHCP server. The DHCP server will automatically assign an IP address to each connected computer if the connected computer is set to ―Obtain an IP address automatically‖.
  • Page 10 CONCEPTRONIC C150APRA2 ENGLISH The Properties window of the Local Area Connection will appear. D. Select the ―Internet Protocol Version 4 (TCP/IPv4)‖ and click ―Properties‖. The Properties window of the Internet Protocol Version 4 (TCP/IPv4) will appear. E. Set the properties to ―Obtain an IP address automatically‖...

  • Page 11: Checking Your Connection

    CONCEPTRONIC C150APRA2 ENGLISH Checking your connection With the Command Prompt of Windows you can verify if you have received a correct IP address on your (wired or wireless) Local Area Connection. This example is based on Windows Vista with Service Pack 1. Windows Vista needs administrative rights to perform the steps below. There is an explanation on how to gain administrative rights.
  • Page 12 CONCEPTRONIC C150APRA2 ENGLISH If above steps do not solve the IP address problem, you can reset the device to the factory default settings with the Reset button on the back of the device. Press and hold the Reset button for +/- 15 seconds to load the factory default settings. When the Status LED is active again, repeat step B to renew your IP address.

  • Page 13: Modem Router Configuration

    : disabled (can be enabled when internet connection is configured) When you have changed settings in the configuration of the C150APRA2, they will be saved to the memory of the router. To restore the factory default settings, press and hold the reset button on the back of the device for +/- 15 seconds.
  • Page 14 CONCEPTRONIC C150APRA2 ENGLISH When the Username and Password are correct the router will display the ―overview‖ page: The ―overview‖ page shows a quick menu for configuring and maintaining the C150APRA2.

  • Page 15: Setup

    CONCEPTRONIC C150APRA2 ENGLISH Setup In the ―Setup‖ menu, you can configure the basic configuration for your modem router. 5.3.1 Setup - Wizard Wizard helps you to fast and accurately configure Internet connection and other important parameters. The following sections describe these various configuration parameters.
  • Page 16 CONCEPTRONIC C150APRA2 ENGLISH Step 3 Set the time and date. Then, click Next. Step 4 Configure the Internet connection. Select the country and ISP from the drop-down list. If the Country is set to Belgium, the ISP is set to FullADSL, the Protocol is set to PPPoE or PPPoA, the page as shown in the following figure appears: You need to enter the user name and password for PPPoE or PPPoA dialup.
  • Page 17 CONCEPTRONIC C150APRA2 ENGLISH If the Protocol is set to Dynamic IP, the page as shown in the following figure appears: If the Protocol is set to Static IP, the page as shown in the following figure appears: You need to enter the information of the IP address, subnet mask, and gateway.
  • Page 18 CONCEPTRONIC C150APRA2 ENGLISH If the Protocol is set to Bridge, the page as shown in the following figure appears: If you click Scan, the system automatically searches the available PVCs. After the searching is complete, the result appears next to the Scan button.
  • Page 19 CONCEPTRONIC C150APRA2 ENGLISH Step 5 Configure the wireless network. Enter the information and click Next. Step 6 View the configuration information of the device. To modify the information, click Back. To effect the configuration, click Apply.
  • Page 20 CONCEPTRONIC C150APRA2 ENGLISH Note: In each step of the Wizard page, you can click Back to review or modify the previous settings or click Cancel to exit the wizard.

  • Page 21: Setup - Internet Setup

    CONCEPTRONIC C150APRA2 ENGLISH 5.3.2 Setup - Internet Setup Choose Setup > Internet Setup. The page as shown in the following figure appears: In this page, you can configure the WAN interface of the device. Click Add and the page as shown in the following figure appears:...
  • Page 22 CONCEPTRONIC C150APRA2 ENGLISH...
  • Page 23 CONCEPTRONIC C150APRA2 ENGLISH The following table describes the parameters in this page. ATM PVC CONFIGURATION Field Description Virtual Path Identifier (VPI) is the virtual path between two points in an ATM network. Its value range is from 0 to 255.

  • Page 24: Setup - Wireless

    CONCEPTRONIC C150APRA2 ENGLISH 5.3.3 Setup - Wireless This section describes the wireless LAN and some basic configuration. Wireless LANs can be as simple as two computers with wireless LAN cards communicating in a pear-to-pear network or as complex as a number of computers with wireless LAN cards communicating through access points that bridge network traffic to a wired LAN.
  • Page 25 CONCEPTRONIC C150APRA2 ENGLISH The following table describes the parameters in this page. Field Description Select or deselect the check box to enable or disable the wireless Enable Wireless function. Select or deselect the check box to enable or disable multiAP Enable MultiAP Isolation isolation.

  • Page 26: Setup - Wireless - Wireless Security

    CONCEPTRONIC C150APRA2 ENGLISH 5.3.3.2 Setup – Wireless - Wireless Security In the WIRELESS SETTINGS page, click Wireless Security. The page as shown in the following figure appears: Wireless security is vital to your network to protect the wireless communication among wireless stations, access points and the wired network.
  • Page 27 CONCEPTRONIC C150APRA2 ENGLISH If the Security Mode is set to WEP, the page as shown in the following figure appears: The following table describes the parameters in this page. Field Description You can select 64 bits or 128 bits from the drop-down list.
  • Page 28 CONCEPTRONIC C150APRA2 ENGLISH Auto (WPA or WPA2) If the Security Mode is set to Auto (WPA or WPA2), the page as shown in the following figure appears: The following table describes the parameters in this page. Field Description You can select Auto (WPA or WPA2)-PSK or Auto (WPA or WPA Mode WPA2)-WPA for Enterprise from the drop-down list.
  • Page 29 CONCEPTRONIC C150APRA2 ENGLISH If the WPA Mode is set to Auto (WPA or WPA2)-Enterprise, the page as shown in the following figure appears: You need to enter the IP address, port, shared key of the RADIUS server. Click Apply to save the settings.
  • Page 30 CONCEPTRONIC C150APRA2 ENGLISH WPA2 Only If the Security Mode is set to WPA2 only, the page as shown in the following figure appears: Parameters in this page are similar to those in the page for Auto (WPA or WPA2). Click Apply to save the settings.
  • Page 31 CONCEPTRONIC C150APRA2 ENGLISH WPA Only If the Security Mode is set to WPA only, the page as shown in the following figure appears: Parameters in this page are similar to those in the page for Auto (WPA or WPA2). Click Apply to save the settings.

  • Page 32: Setup - Local Network

    CONCEPTRONIC C150APRA2 ENGLISH 5.3.4 Setup - Local Network You can configure the LAN IP address according to the actual application. The preset IP address is 192.168.0.1. You can use the default settings and DHCP service to manage the IP settings of the private network.
  • Page 33 CONCEPTRONIC C150APRA2 ENGLISH By default, Enable DHCP Server is selected for the LAN interface of the device. DHCP service provides IP settings to workstations configured to automatically obtain IP settings that are connected to the device through the Ethernet port. When the device is used for DHCP, it becomes the default gateway for DHCP client connected to it.

  • Page 34: Setup - Time And Date

    CONCEPTRONIC C150APRA2 ENGLISH 5.3.5 Setup - Time and Date Choose Setup > Time and Date. The TIME AND DATE page as shown in the following figure appears: In the TIME AND DATE page, you can configure, update, and maintain the time of the internal system clock.

  • Page 35: Setup - Logout

    CONCEPTRONIC C150APRA2 ENGLISH 5.3.6 Setup - Logout Choose Setup > Logout. The page as shown in the following figure appears: Click Logout to log out of the configuration page.

  • Page 36: Advanced

    CONCEPTRONIC C150APRA2 ENGLISH Advanced This section contains advanced features used for network management, security and administrative tools to manage the device. You can view the status and other information of the device, to examine the performance and troubleshoot. 5.4.1 Advanced – Port Forwarding This function is used to open ports in your device and re-direct data through these ports to a single PC in your network (WAN-to-LAN traffic).
  • Page 37 CONCEPTRONIC C150APRA2 ENGLISH Select a service for a preset application or enter the name in the Custom Server field. Enter an IP address in the Server IP Address field, to appoint the corresponding PC to receive forwarded packets. The port table displays the ports that you want to open on the device. The Protocol indicates the...
  • Page 38 CONCEPTRONIC C150APRA2 ENGLISH Click Apply to save the settings. The page as shown in the following figure appears. A virtual server is added.

  • Page 39: Advanced - Advanced Wireless

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.2 Advanced – Advanced Wireless This function is used to modify the standard 802.11g wireless settings. It is recommended not changing the default settings, because incorrect settings may affect the performance of the wireless performance. The default settings provide the best wireless performance in most environments.

  • Page 40: Advanced - Advanced Wireless - Advanced Settings

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.2.1 Advanced – Advanced Wireless – Advanced Settings In the ADVANCED WIRELESS page, click Advanced Settings. The page as shown in the following figure appears:...
  • Page 41 CONCEPTRONIC C150APRA2 ENGLISH The following table describes the parameters in this page. ADVANCED WIRELESS SETTINGS Field Description Select the transmission rate of the wireless network from the Transmission Rate drop-down list. Select the multicast transmission rate of the wireless network Multicast Rate from the drop-down list.

  • Page 42: Advanced - Advanced Wireless - Mac Filtering

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.2.2 Advanced – Advanced Wireless – MAC Filtering In the ADVANCED WIRELESS page, click MAC Filtering. The page as shown in the following figure appears: Click Add and the page as shown in the following figure appears:...
  • Page 43 CONCEPTRONIC C150APRA2 ENGLISH The following table describes the parameters in this page. Field Description Enter the name that identifies your configuration. For example, User Name kids. Enter the MAC address of the computer that connects to the Current PC’s MAC Address device.

  • Page 44: Advanced - Advanced Wireless - Security Settings

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.2.3 Advanced – Advanced Wireless – Security Settings In the ADVANCED WIRELESS page, click Security Settings. The page as shown in the following figure appears: Select the desired SSID from the drop-down list. Select the encryption type from the Security Mode drop-down list. You can select None, WEP, AUTO (WPA or WPA2), WPA Only, or WPA2 Only.

  • Page 45: Advanced - Advanced Wireless - Wps Settings

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.2.4 Advanced – Advanced Wireless – WPS Settings In the ADVANCED WIRELESS page, click WPS Settings. The WIRELESS WPS page as shown in the following figure appears: Enabled: The WPS service is enabled by default. Note: Ensure that the network card supports the WPS function.

  • Page 46: Advanced - Dmz

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.3 Advanced – DMZ Choose Advanced > DMZ. The page as shown in the following figure appears: In this page, you can enable a DMZ host. In this way, access from Internet to the WAN IP address of the device is forwarded to the DMZ host and network server of the internal LAN is protected.

  • Page 47: Advanced - Parental Control

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.4 Advanced – Parental Control Choose Advanced > Parental Control. The PARENTAL CONTROL page as shown in the following figure appears: This page provides two useful tools for restricting Internet access. Block Website allows you to quickly create a list of websites that you wish to prevent users from accessing. Block MAC Address...

  • Page 48: Advanced - Parental Control - Block Website

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.4.1 Advanced – Parental Control - Block Website In the PARENTAL CONTROL page, click Block Website. The page as shown in the following figure appears: Click Add. The page as shown in the following page appears:...
  • Page 49 CONCEPTRONIC C150APRA2 ENGLISH Enter the website in the URL field. Select the time to block websites from the Schedule drop-down list, or select Manual Schedule and set the corresponding time and days. Click Submit to add the website to the BLOCK WEBSITE table.

  • Page 50: Advanced - Parental Control - Block Mac Address

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.4.2 Advanced – Parental Control – Block MAC Address In the PARENTAL CONTROL page, click Block MAC Address. The page as shown in the following figure appears: Note: The Block MAC Address feature from the PARENTAL CONTROL page refers to the MAC Filtering from the ADVANCED SETTINGS page.

  • Page 51: Advanced - Filtering Options

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.5 Advanced – Filtering Options Choose Advanced > Filtering Options. The FILTERING OPTIONS page as shown in the following figure appears:...

  • Page 52: Advanced - Filtering Options - Inbound Ip Filtering

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.5.1 Advanced – Filtering Options – Inbound IP Filtering In the FILTERING OPTIONS page, click Inbound IP Filtering. The INCOMING IP FILTERING page as shown in the following figure appears: Click Add to add an inbound IP filter. The page as shown in the following figure appears:...
  • Page 53 CONCEPTRONIC C150APRA2 ENGLISH Enter the Filter Name and specify at least one of the following criteria: protocol, source/destination IP address, subnet mask, and source/destination port. Click Apply to save the settings. Note: The settings apply only when the firewall is enabled.

  • Page 54: Advanced - Filtering Options - Outbound Ip Filtering

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.5.2 Advanced – Filtering Options – Outbound IP Filtering By default, all outgoing IP traffic from the LAN is allowed. The outbound filter allows you to create a filter rule to block outgoing IP traffic by specifying a filter name and at least one criterion.
  • Page 55 CONCEPTRONIC C150APRA2 ENGLISH Enter the Filter Name and specify at least one of the following criteria: protocol, source/destination IP address, subnet mask, and source/destination port. Click Apply to save the settings. The ACTIVE OUTBOUND FILTER in the OUTGOING IP FILTERING page displays detailed information OF each created outbound IP filter.

  • Page 56: Advanced - Filtering Options - Bridge Filtering

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.5.3 Advanced – Filtering Options – Bridge Filtering In the FILTERING OPTIONS page, click Bridge Filtering. The page as shown in the following figure appears: This page is used to configure bridge parameters. In this page, you can modify the settings or view the information of the bridge and its attached ports.
  • Page 57 CONCEPTRONIC C150APRA2 ENGLISH The following table describes the parameters in this page. Field Description Select the protocol type to be mapped from the drop-down list. Protocol Type You can select PPPoE, IPv4, IPv6, AppleTalk, IPX, NetBEUI, or IGMP. Destination MAC Address Enter the destination MAC address to be mapped.

  • Page 58: Advanced - Qos Config

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.6 Advanced – QOS Config Choose Advanced > QoS Config. The page as shown in the following figure appears:...

  • Page 59: Advanced - Qos Config - Qos Interface Config

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.6.1 Advanced – QOS Config – QOS Interface Config In the QoS CONFIG page, click QoS Interface Config. The page as shown in the following figure appears: Click Edit and the page as shown in the following figure appears:...
  • Page 60 CONCEPTRONIC C150APRA2 ENGLISH In this page, you can configure the uplink bandwidth and downlink bandwidth of each interface. The uplink rate and the downlink rate are limited according to the configured bandwidth. Click Apply to save the settings.

  • Page 61: Advanced - Qos Config - Qos Queue Config

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.6.2 Advanced – QOS Config – QOS Queue Config In the QoS CONFIG page, click Qos Queue Config. The page as shown in the following figure appears: In this page, you can configure the priority of the queue. The device supports the following three priority levels: high, medium, low.
  • Page 62 CONCEPTRONIC C150APRA2 ENGLISH Click Apply to save the settings.

  • Page 63: Advanced - Qos Config - Qos Classify Config

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.6.3 Advanced – QOS Config – QOS Classify Config In the QoS CONFIG page, click QoS Classify Configuration. The page as shown in the following figure appears: This page displays the classes. Click Add and the page as shown in the following figure appears:...
  • Page 64 CONCEPTRONIC C150APRA2 ENGLISH...
  • Page 65 CONCEPTRONIC C150APRA2 ENGLISH The following table describes the parameters in this page. Field Description Traffic Class Name Enter the name of the traffic class. Select or deselect the check box to enable or disable QoS Enable Classification classification. SPECIFY TRAFFIC CLASSIFICATION RULES...

  • Page 66: Advanced - Firewall Settings

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.7 Advanced – Firewall Settings A denial-of-service (DoS) attack is one of the most common network attacks and is characterized by an explicit attempt by attackers to prevent legitimate users of a service from using that service. It usually leads to overload of system server or core dump of the system.

  • Page 67: Advanced - Dns

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.8 Advanced – DNS Domain name system (DNS) is an Internet service that translates domain names into IP addresses. Because domain names are alphabetic, they are easier to remember. The Internet, however, is actually based on IP addresses. Each time you use a domain name, a DNS service must translate the name into the corresponding IP address.
  • Page 68 CONCEPTRONIC C150APRA2 ENGLISH The following table describes the parameters in this page. Field Description If you select this radio button, the device automatically obtains IP Obtain DNS server address address of the DNS server from the ISP . You need not manually automatically enter the IP address of the server.

  • Page 69: Advanced - Dynamic Dns

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.9 Advanced – Dynamic DNS The device supports dynamic domain name service (DDNS). The dynamic DNS service allows a dynamic public IP address to be associated with a static host name in any of the many domains, and allows access to a specified host from various locations on the Internet.
  • Page 70 CONCEPTRONIC C150APRA2 ENGLISH The following table describes the parameters in this page. Field Description Select the DDNS provider from the drop-down list. You can select DDNS provider DynDns.org, TZO, or GnuDIP. Hostname Enter the host name that you register with your DDNS provider.

  • Page 71: Advanced – Network Tools

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.10 Advanced – Network Tools Choose Advanced > Network Tools. The NETWORK TOOLS page as shown in the following figure appears:...
  • Page 72 CONCEPTRONIC C150APRA2 ENGLISH 5.4.10.1 Advanced – Network Tools – Port Mapping In the NETWORK TOOLS page, click Port Mapping. The page as shown in the following figure appears: In this page, you can bind the WAN interface and the LAN interface to the same group.
  • Page 73 CONCEPTRONIC C150APRA2 ENGLISH To create a mapping group, do as follows: Step 1 Enter the group name. Step 2 Select interfaces from the Available Interfaces list and click the <- arrow button to add them to the grouped interface list, in order to create the required mapping of the ports.
  • Page 74 CONCEPTRONIC C150APRA2 ENGLISH 5.4.10.2 Advanced – Network Tools – IGMP Proxy In the NETWORK TOOLS page, click IGMP Proxy. The page as shown in the following figure appears: IGMP proxy enables the device to issue IGMP host messages on behalf of hosts that the system discovered through standard IGMP interfaces.
  • Page 75 CONCEPTRONIC C150APRA2 ENGLISH 5.4.10.3 Advanced – Network Tools – IGMP Snooping When IGMP snooping is enabled, only hosts that belong to the group receive the multicast packets. If a host is deleted from the group, the host cannot receive the multicast packets any more.
  • Page 76 CONCEPTRONIC C150APRA2 ENGLISH 5.4.10.4 Advanced – Network Tools – UPnP In the NETWORK TOOLS page, click Upnp. The page as shown in the following figure appears: In this page, you can enable universal plug and play (UPnP) and then the system serves as a daemon.
  • Page 77 CONCEPTRONIC C150APRA2 ENGLISH 5.4.10.5 Advanced – Network Tools – ADSL In the NETWORK TOOLS page, click ADSL. The page as shown in the following figure appears: In this page, you can select the ADSL modulation. Normally, you are recommended to keep the factory defaults.
  • Page 78 CONCEPTRONIC C150APRA2 ENGLISH 5.4.10.6 Advanced – Network Tools – SNMP In the NETWORK TOOLS page, click SNMP. The page as shown in the following figure appears: In this page, you can set the SNMP parameters. The following table describes the parameters in this page.

  • Page 79: Advanced – Routing

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.11 Advanced – Routing Choose Advanced > Routing. The page as shown in the following page appears: This page contains the following function items: static route, default gateway, and RIP settings.
  • Page 80 CONCEPTRONIC C150APRA2 ENGLISH 5.4.11.1 Advanced – Routing – Static Routing Choose Advanced > Routing and click Static Route. The page as shown in the following figure appears: This page displays the information of existing static routes. Click Add and the page as shown in the following figure appears:...
  • Page 81 CONCEPTRONIC C150APRA2 ENGLISH The following table describes the parameters in this page. Field Description Destination Network The destination IP address of the device. Address Subnet Mask The subnet mask of the destination IP address. Use Gateway IP Address The gateway IP address of the device.
  • Page 82 CONCEPTRONIC C150APRA2 ENGLISH 5.4.11.2 Advanced – Routing – Default Gateway Choose Advanced > Routing and click Default Gateway. The page as shown in the following figure appears: In this page, you can select Enable Automatic Assigned Default Gateway, or enter the information in the Use Gateway IP Address and Use Interface fields.
  • Page 83 CONCEPTRONIC C150APRA2 ENGLISH 5.4.11.3 Advanced – Routing – RIP Choose Advanced > Routing and click RIP. The page as shown in the following figure appears: In this page, you can view the interfaces on your device that use RIP and the version of the protocol used.

  • Page 84: Advanced – Schedules

    CONCEPTRONIC C150APRA2 ENGLISH 5.4.12 Advanced – Schedules Choose Advanced > Schedules. The page as shown in the following figure appears: Click Add to add a schedule rule. The page as shown in the following figure appears:...

  • Page 85: Advanced – Logout

    CONCEPTRONIC C150APRA2 ENGLISH The following table describes the parameters in this page. Field Description Name Set the name of the schedule. Day(s) You can select one, more, or all of the seven days in a week. If you select the check box, the rule applies throughout the 24 All Day –...
  • Page 86 CONCEPTRONIC C150APRA2 ENGLISH Management 5.5.1 Management – System Management Choose Management > System Management. The System page as shown in the following figure appears: In this page, you can restart the device, back up the current settings to a file, update the backup file, and restore the factory default settings.

  • Page 87: Management – Firmware Update

    CONCEPTRONIC C150APRA2 ENGLISH 5.5.2 Management – Firmware Update Choose Management > Firmware Update. The page as shown in the following figure appears: In this page, you can upgrade the firmware of the device. To update the firmware, do as follows: Step 1 Click Browse…to select the file.

  • Page 88: Management – Access Controls

    CONCEPTRONIC C150APRA2 ENGLISH 5.5.3 Management – Access Controls Choose Management > Access Controls. The ACCESS CONTROLS page as shown in the following figure appears: This page contains Account Password, Services, and IP Address.
  • Page 89 CONCEPTRONIC C150APRA2 ENGLISH 5.5.3.1 Management – Access Controls – User Management In the ACCESS CONTROLS page, click Account Password. The page as shown in the following figure appears: In this page, you can change the password and set the time for automatic logout.
  • Page 90 CONCEPTRONIC C150APRA2 ENGLISH The following table describes the parameters in this page. ACCOUNT PASSWORD Field Description Select a user name from the drop-down list to access the device. Username You can select admin. Current Password Enter the password of the user.
  • Page 91 CONCEPTRONIC C150APRA2 ENGLISH 5.5.3.2 Management – Access Controls – Services In the ACCESS CONTROLS page, click Services. The page as shown in the following figure appears: In this page, you can enable or disable the services that are used by the remote host. For example,...
  • Page 92 CONCEPTRONIC C150APRA2 ENGLISH 5.5.3.3 Management – Access Controls – IP Address In the ACCESS CONTROLS page, click IP Address. The page as shown in the following figure appears: In this page, you can configure the IP address in the access control list (ACL). If ACL is enabled, only devices of the specified IP addresses can access the device.
  • Page 93 CONCEPTRONIC C150APRA2 ENGLISH Click Add. The page as shown in the following figure appears: Enter the IP address of the desired device in the IP Address field and click Apply to apply the settings.

  • Page 94: Management – Diagnosis

    CONCEPTRONIC C150APRA2 ENGLISH 5.5.4 Management – Diagnosis Choose Management > Diagnosis. The page as shown in the following figure appears: In this page, you can test the connection status of the device. Click Return Diagnostics Test to run diagnostics. The page as shown in the following figure appears: Note: The above diagnostics information is an example.

  • Page 95: Management – Log Configuration

    CONCEPTRONIC C150APRA2 ENGLISH 5.5.5 Management – Log Configuration Choose Management > Log Configuration. The SYSTEM LOG page as shown in the following figure appears: In this page, you can enable the log function. You can set Mode to Local, Remote, or Both. Local indicates to save the log in the local computer.
  • Page 96 CONCEPTRONIC C150APRA2 ENGLISH 5.5.6 Management – Logout Choose Management > Logout. The page as shown in the following figure appears: Click Logout to log out of the configuration page.
  • Page 97 CONCEPTRONIC C150APRA2 ENGLISH Status In the Status page, you can view the system information and monitor the performance of the device. 5.6.1 Status – Device Info Choose Status > Device Info. The page as shown in the following figure appears: The page displays the summary of the device status, including the system information, WAN connection information, wireless information, and local network information.

  • Page 98: Status – Wireless Clients

    CONCEPTRONIC C150APRA2 ENGLISH 5.6.2 Status – Wireless Clients Choose Status > Wireless Clients. The page as shown in the following page appears: The page displays authenticated wireless stations and their statuses. 5.6.3 Status – DHCP Clients Choose Status > DHCP Clients. The page as shown in the following page appears: This page displays all client devices that obtain IP addresses from the device.

  • Page 99: Status – Logs

    CONCEPTRONIC C150APRA2 ENGLISH 5.6.4 Status – Logs Choose Status > Logs. The page as shown in the following figure appears: This page displays the system log. Click Refresh to refresh the system log shown in the box.

  • Page 100: Status – Statistics

    CONCEPTRONIC C150APRA2 ENGLISH 5.6.5 Status – Statistics Choose Status > Statistics. The page as shown in the following figure appears: This page displays the statistics information of the network and data transmission. The information helps technicians to identify whether the device is functioning properly. The information does not...

  • Page 101: Status – Route Info

    CONCEPTRONIC C150APRA2 ENGLISH 5.6.6 Status – Route Info Choose Status > Route Info. The page as shown in the following figure appears: The table displays destination routes commonly accessed by the network. 5.6.7 Status – Logout Choose Staus > Logout. The page as shown in the following figure appears:...
  • Page 102 CONCEPTRONIC C150APRA2 ENGLISH Help The Help menu will help you with information about all the items in the configuration of the device.
  • Page 103 CONCEPTRONIC C150APRA2 ENGLISH 6. Frequently Asked Questions Below you will find some frequently asked questions for the device. Question Answer  Check the connection between the power adapter and the Why are all the indicators power socket. off?  Check whether the power switch is turned on.

  • Page 104: Availability Of Source Code

    Availability of source code Conceptronic. has eposed the full source code of the GPL licensed software, including any scripts to control compilation and installation of the object code. All future firmware updates will also be accompanied with their respective source code. For more information on how you can obtain our open source code, please visit our web site.
  • Page 105 CONCEPTRONIC C150APRA2 ENGLISH GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program"...
  • Page 106 CONCEPTRONIC C150APRA2 ENGLISH 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
  • Page 107 CONCEPTRONIC C150APRA2 ENGLISH NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"...
  • Page 108 CONCEPTRONIC C150APRA2 ENGLISH GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
  • Page 109 CONCEPTRONIC C150APRA2 ENGLISH GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License").
  • Page 110 CONCEPTRONIC C150APRA2 ENGLISH 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.
  • Page 111 CONCEPTRONIC C150APRA2 ENGLISH 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License.

Table of Contents