Closing Down; Maintenance And Repair; Appendix - M&C TRN Operating Manual

•
Check whether the controller is functioning properly:
Set maximum desired temperature
When the desired temperature is reached ⇒
out.
On installation, the controller should basically be checked to see whether it switches at the set values
and reaches the desired operating temperature.
13

CLOSING DOWN

No special measures are to be taken for closing down the equipment.
14

MAINTENANCE AND REPAIR

The controller TR... are working maintenance-free for a long period of time.
In case the controller is defective, please send the device to M&C for repair.
The controller is equipped with a sensor break protection that in case of
need cuts off the unit as long as the defective sensor has not been
exchanged.
N O T E !
15

APPENDIX

Further product documentation can be seen and downloaded from our home page:
www.mc-techgroup.com
2-5.1.2-ME
⇒
yellow LED lights up
controller switches heating off, yellow LED goes
Gas sampling and conditioning technology
10