Advertisement
Preamp select switch
This enables the user to switch between PREAMP ONE and PREAMP TWO from the front
panel. This can also be switched from the 2-way footswitch provided or by the optional
5-way foot controller.
The corresponding LED will light up green for PREAMP ONE and red for PREAMP TWO.
It will also light up amber if the 5-way footswitch is used and PREAMP 0NE & TWO are
selected.
N.B. If the 2-way footswitch is used to switch to CHANNEL 2 this will take priority over
the push switch.
Boost select switch
This enables the user to switch the BOOST function on and off from the front panel. This
can also be switched from the 2-way footswitch provided or by the optional 5-way foot
controller.
The corresponding LED will light up red when BOOST is selected.
N.B. If the 2-way footswitch is used to switch on BOOST this will take priority over the
push switch.
Preamp one
This channel has been voiced primarily for clean sounds with the controls at low to
halfway settings, but with higher settings it can be driven harder for classic slightly
overdriven blues tones or a vintage style crunch.
Using the BOOST function further increases the sonic capabilities.
Volume
This sets the level of PREAMP ONE and also has a large effect on the tone. From low to
medium settings the sound is bright and clean which will suit most clean guitar styles. As
it is increased the preamp will be pushed gradually towards a more overdriven tone,
which responds well to the players dynamics.
Treble, Middle & Bass
The tone controls are all passive and interactive.
TREBLE, MIDDLE and BASS all work in the conventional way, on this channel the
operating frequencies have been set specifically for vintage clean and slightly overdriven
sounds. Passive controls were chosen throughout the amplifier as they provide the best
and most natural kind of equalisation for a guitar signal.
5
Advertisement
