How to Watch Both Analog and Digital Broadcasts with Two Antennas
Connection Method
Connect an analog antenna to ANT 1 terminal for analog source and a digital antenna to ANT 2 terminal for digital
source. Please ensure to connect an antenna to a correct terminal. (If you connect an analog antenna cable to ANT
2, you cannot watch TV program.)
- When inserting a 75
- If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.
How to Watch
Turn on TV to activate Auto Channel
1
2
Press
INPUT on remote control.
3
Press
to move to Analog TV or Digital TV and press
4
Press
button or
Ex.) When you want to watch cable channel number 120, press
the digit buttons.
While watching analog broadcast, you can switch an analog signal to a digital signal by pressing the
Analog TV antenna cable
ohm coaxial cable into the input connection, ensure the wire tip not to bend.
(See page 47)
to memorize the available channels.
button to select the desired channels.
HYUNDAI Digital PDP TV
Digital TV antenna cable
to select.
+
+
button.
18