FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes thefollowing warning : NOTE : This equipment has been tested and found to comply with the limits for a Class B digital devicepursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation.
Page 3
* Image Sticking does not come under the warranty. HYUNDAI Digital PDP TV See 30 page)
Page 4
Image Sticking Precaution When watching a still Image within motion pictures and Panorama/Wide/4:3 screen 1. Note : - When the central area of the screen and the screen edges are fixed, the different brightness level of the edges may cause image retention on the edges when watching for a long time - This phenomenon is the same matter to other LCD manufacturers.
HYUNDAI Digital PDP TV Features Integrated HDTV An HDTV has a built-in ATSC digital tuner. It does not need a separate set-top box to receive over the-air & Cable DTV signal. Dual Scan/Multi-Viewing You can program analog TV broadcasting and digital TV broadcasting automatically at the same time for multi-viewing.
How to Adjust the Desired Audio Mode ...39 How to Use the Automatic Volume Control ...40 How to Select MTS(Multi-Channel Sound) ...41 HYUNDAI Digital PDP TV How to Listen to SRS TruSurround XT (Surround) ...42 How to Set the Output of Subwoofer ...43 How to Set the Speaker Output ...44...
Safety Precaution The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
Page 9
- When there is a need for fixing, call a service center. Fire or electric shock may be caused. HYUNDAI Digital PDP TV Firmly plug in the power cord so that it does not pull out. - An unstable connection may cause fire.
Page 10
Safety Precaution The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. Please avoid touching the panel at the rear of TV as it is producing high temperature. - Direct contact with the hot surface may cause physical burns.
Page 11
- Electrical cords may be damaged, resulting in a fire or an electrical shock. HYUNDAI Digital PDP TV Unplug the product during lightning or thunderstorms and never touch the antenna cable.
Contents of the Package hen opening the package, please ensure to check the following accessories provided. Antenna Cable (coaxial cable) Products Sold Separately If you want to purchase separately sold products, consult a service center, electronics shops, or parts seller. Component(Y, Pb, Pr) cable Composite(Video &...
HYUNDAI Digital PDP TV How To Install Desktop Stand 1. Place the TV body on a flat desk or a shelf. Clean the surface of the desk or the shelf in order to prevent scratch on the product. 2. Align the stand with TV body below and fasten the stand bars using 4 fixing screws.
How To Use Speakers (Standing Type) Parts configuration chart 2 Speakers (left and right) Assembly and Connection Method Insert brackets into the grooves on the rear of speakers and fasten them with fixing screws. (Left and right side each) Do not move the product holding the speakers. Always use handles on the TV. WARNING (Brackets connecting TV and speakers may be damaged.) 4 brackets...
Page 15
Assembly and Connect method Insert speaker-stands in the groove on the bottom of speakers and fasten them using fixing screws. (Left and right side each) HYUNDAI Digital PDP TV 2 Speaker-stands 8 fixing screws (left and right) Upright and place them on the desired place left and right of TV.
Parts Names and Functions Front View * This product image may be a bit different from the actual product. Power button Use this button to turn on or off the TV. Volume buttons Use these buttons to adjust sound levels. These buttons also serve as the cursors of Select/Adjust in Menu mode.
Component 2 Video input terminal Component 2 Audio input terminal Component 1 Video input terminal Component 1 Audio input terminal S-Video input terminal HYUNDAI Digital PDP TV Video input terminal S-Video/Video Audio input terminal RS-232 input terminal Connect to the RS-232 terminal of a PC to check its service.
Remote Control 1. POWER/STANDBY 2. MUTE/Magic This button is also used when setting up to use other external device. 3. PIP FUNCTIONS - PIP : Use this button for PIP On/Off. - SOURCE : Use this button to select the input source of sub-picture. - SIZE : Use this button to select the size of sub-picture.
Page 19
Use this button to display resolution or various program information. How to Insert Batteries in Remote Control Press and hold ∆ part and push to open cover. * Battery type :1.5V/AAA HYUNDAI Digital PDP TV 25. SOURCE Use this button to select External Input 26. VOLUME 27. FREEZE 28.
How to Watch Both Analog and Digital Broadcasts with a Single Antenna You can watch both analog and digital broadcasts by connecting a single antenna. Connection Method Make sure that the antenna cable is connected to ANT 1 (ATV/DTV). - Antenna or Cable service without a cable box connections - For optimum picture quality, adjust antenna direction if need, - When inserting a 75 - If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.
Ex.) When you want to watch cable channel number 120, press the digit buttons. While watching analog broadcast, you can switch an analog signal to a digital signal by pressing the HYUNDAI Digital PDP TV Digital TV antenna cable Analog TV antenna cable (See page 47) to memorize the available channels.
Before Connecting the Video/Audio Connections to External Devices... Please make sure to read the following information on connection to enjoy best picture quality. Video/Audio connectors Types of video/audio cable : ➀ HDMI / DVI-D ➁ 15-Pin D-Sub ➂ COMPONENT ➃ S-VIDEO ➄ COMPOSITE Best picture quality is displayed in the following order.
Video or S-Video and press For more information, read the user’s guide of VCR or cable receiver. To enjoy better picture quality, use the S-Video cable rather than the composite cable. HYUNDAI Digital PDP TV Video/Cable receiver Audio cable...
How to Connect a DTV Receiver or DVD Player Connection Method Connect the Video cable (Y, Pb, Pr) between output terminals (Y, Pb, Pr) of DTV receiver or DVD player and the input terminals (Y, Pb, Pr) of DTV/DVD (480i/480p/720p/1080i) on the rear of TV. (Connect the jacks to terminal in the same color.) Connect the Audio cable between Audio output terminal of DTV receiver or DVD player and Audio input terminal for DTV/DVD Audio on the rear of TV.
Turn on TV and press on remote control. Press to move Video or S-Video and press For more information, read the user’s guide of Game player or Camcorder. HYUNDAI Digital PDP TV Camcorder Audio cable Video cable or S-Video Cable to select.
How to Connect to a PC Connection Method Connect the PC signal cable (15-pin D-sub) between the output terminal of PC and the D-sub input terminal of Connect the Audio cable between Audio output terminal of PC and Audio input terminal for PC on the rear of TV.
Resolutions Supported in PC Resolution 640 x 350 640 x 480 720 x 400 800 x 600 832 x 624 1024 x 768 HYUNDAI Digital PDP TV Horizontal frequency 31.47 37.86 31.47 37.86 37.50 43.27 31.47 37.88 48.08 46.88 53.67 49.72...
HDMI Connection - HDMI *1 (High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that supportsuncompressed standard. The HDMI terminal supports both video and audio information.To the HDMI*1 input terminal, you can connect an EIA/CEA-861/861B*2 compliant consumer electronic device, such asa Set Top Box or DVD player with HDMI or DVI output terminal.Input a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to this HDMI terminal, so youcan display the high-definition pictures on this TV in the digital form.
Page 29
- *2 EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video includinghigh bandwidth digital content protection. - *3 HDMI-DVI conversion cable (TY-SCHO3DH): available on Panasonic Website (www.panasonic.com). Consult yourconsumer electronics dealer for availability details. HYUNDAI Digital PDP TV to select .
How to Connect an External Visual Device You can connect your TV to other visual device to watch two TV programs at the same time. Connection Method Connect the Composite Video cable between Video input terminals of an external device and the Video output terminals for Video on the rear of TV.
Do not look into directly the beam with the optical port. Doing so may damage your eyesight. Digital Audio Output is available when watching a digital TV program. HYUNDAI Digital PDP TV (See page 44~45) Amplifier with Built-in Dolby Digital AC3...
How to Select the Picture Mode Users can automatically adjust the picture mode according to the input mode. Press Menu button. Menu items appear on the screen. Press button to select “MODE” is selected. Whenever you press Left or Right button, the mode changes in following order.
BRIGHTNESS : Adjust the brightness of the entire picture. SHARPNESS : Adjust clarity of outline of objects. COLOR : Adjust colors into deeper or lighter colors. TINT : Adjust colors naturally. SHARPNESS, COLOR, TINT are not applied to PC and HDMI (or DVI) modes. HYUNDAI Digital PDP TV...
How to Adjust the Color Temperature of the Screen Users can manually adjust their desired color temperature. Press Menu button. Menu items appear on the screen. Press button to select Press Up and Down buttons to move to “COLOR TEMP”. Whenever you press Left or Right button, the mode changes in following order.
- Under Digital TV input : Users can select - Under PC inputs : Users can select - Under HDMI (or DVI) inputs, Component 1,2 : Users can select - Under other inputs : Users can select HYUNDAI Digital PDP TV Panorama Zoom 1 Zoom 2 button.
Page 36
AUTO (This is applied in digital broadcasting input mode only.) The screen size automaticaly changes according to a signal source received (General broadcast WIDE General broadcast picture is adjusted to 16:9. Normal 4:3 general picture size Panorama Picture size for panorama video ZOOM 1 Picture enlarged to 16:9 format, letter box format.
After setting Mode, go to STEP 5 if you need to set the SOURCE for Sub-picture. <PIP Small> <DW 1 > Continued on the next page HYUNDAI Digital PDP TV PIP MIDDLE PIP LARGE <PIP Middle> <DW 2 > <PIP Large>...
How to Set the INPUT for the Sub-Picture This function is available only in the PIP mode. Press Up and Down buttons to move to SOURCE Press Left and Right buttons to select SOURCE . The list of sub-picture sources appears. Press Up and Down buttons to move to the sub-picture source you want.
Supported PIP Table HDMI(or DVI) Main HDMI(or DVI) Component 1 Component 2 Analog TV Video S-Video HYUNDAI Digital PDP TV button. Left Top Corner Right Top Corner O → Supported, X → Not Supported PIP : Component 1 Component 2 Analog TV button.
How to Noise Reduct Press Menu button. Menu items appear on the screen. Press button to select Press Up and Down buttons to move to NOISE REDUCT . Whenever you press Left or Right button, the mode changes in following order. Press MENU button after the setting is done, and Menu goes to the previous menu.
SPORTS : For enjoying vivid sound. CUSOTM : When the user wants to set the value. How to Directly Select Sound Mode : Users can select Standard News HYUNDAI Digital PDP TV News Music Sports User See the next page Press MODE.
How to Adjust the Desired Audio Mode Users can adjust sound mode automatically as they want. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press button to select Press Left and Right buttons to select USER . Press Up and Down buttons to move to CUSTOM .
Press Left and Right buttons to set to ON/OFF . Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. HYUNDAI Digital PDP TV...
How to Select MTS(Multi-Channel Sound) Depending on the particaular program being brodcast, you can select stereo, mono, or a Separate Audio Program. (SAP audio is usually a foreign-language translation. Somtimes SAP has unrelated information like news or weathter.) Press Menu button. Menu items appear on the screen.
SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. The SRS TruSurround XT Function is activated only when the audio input signal is Stereo. HYUNDAI Digital PDP TV button OFF in order...
How to Set the Output of Subwoofer You can set this function when you wish to install your subwoofer system. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press button to select Press Up and Down buttons to move to “SUB WOOFER .
Press Up and Down buttons to move to SPEAKER OUT . Press Left and Right buttons to select ON/OFF . Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. HYUNDAI Digital PDP TV...
How to Set the Digital Audio Output The digital audio output terminal allows you to enjoy digital sound. (For more details, see page 28) Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press button to select Press Up and Down buttons to move to...
You can select one of the languages listed you prefer when receiving digital signals. - If you want to see language information while watching a digital channel, press the language information that is currently received. HYUNDAI Digital PDP TV SPANISH FRANCE button.
How to Store Channels Automatically - Your TV can memorize and store all of the available analog/digital broadcast signals for both “off-air” (antenna) and cable channels. - Before your television can begin memorizing the available channels, make sure to specify the type of the signal source (antenna or cable) connected to your TV.
Unlike an analog broadcast, a digital broadcast uses virtual channels, not fixed channels. For more information on virtual channels, see page 71. HYUNDAI Digital PDP TV button once, analog AUTO SCAN is interrupted. If you press...
How to Set Favorite Channels Users can store frequently watched channels to quickly access a preferred channel. - How to store the channel you are currently watching as a favorite channel Press “BOOK-MARK” button. Then the channel will be stored while Favorite Channel Selected is displayed on the screen.
Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. The selected OSD for fine tuned channels is highlighted in orange. HYUNDAI Digital PDP TV...
How to the LNA (Low-Noise-Amplifier) Feature If the reception is clear, you don’t have to use this feature. If the signal is weak or distorted, perform the following steps. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press button to select Press Up and Down buttons to move to “LNA”.
Whenever you press Left or Right button, the mode shifts in following order. ENGLISH Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. HYUNDAI Digital PDP TV FRANÇAIS ESPAÑOL...
How to Set Clock, On/Off Time, Sleep Time - You can automatically turn on or off the TV at a preset time. To do this, you must set the clock if you wish to use the automatic on or off timers. - No Signal Timeout allows you to automatically turn off the TV if there is no broadcast signal for a certain period of time.
Page 57
Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. How to Directly Set the SLEEP TIMER : Press Whenever this button, the mode shifts HYUNDAI Digital PDP TV button. in order.
How to Set the Geometry in PC Mode This function is only available in PC mode. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press button to select Press Up and Down buttons to move to “IMAGE ADJUST”. Press button to select “IMAGE ADJUST”.
Press Up and Down buttons to move to “KEY LOCK”. Press Left and Right buttons to set to ON/OFF . When setting to ON, the control buttons on the front of the TV will be engaged. Continued on next page ... HYUNDAI Digital PDP TV...
Page 60
(Set the Lock External Signal function.) Continued from previous page... - To set Aux Block : Press Up and Down buttons to move to “AUX BLOCK”. Press button to select “AUX BLOCK”. Then the AUX BLOCK items appear. Press Up and Down buttons to move to the item you want. Press Left and Right buttons to set to ON/OFF .
TV Rating General : - Age - Dialogue-sexual dialogue - U Language-adult language (applies to TV-PG, TV-14, TV-MA) - Sex-sexual situations - Violence Continued on next page ... HYUNDAI Digital PDP TV (Permits all programs) (General audience) (Parental guidance suggested) (Parents strongly cautioned) (Restricted)
Page 62
... Continued from previous page. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to and press The message “Enter PIN” will appear. Enter your 4-digit PIN number. The new screen will appear. Press Up and Down buttons to move to “BLOCK PROGRAM”...
- DIGITAL (CAPTION) : You can select a closed caption, service mode(1-7) for digital channels. The service modes support MPEG-2 based transport sources Service 1 and Service2 are the primary and secondary languages, respectively. Service3 and service4.5.6 are additional caption sources that may be available. HYUNDAI Digital PDP TV Continued on next page ...
Page 64
... Continued from previous page. 3. OPTION : Customized closed captioning for the digital caption by choosing the settings for the following options : SIZE : Set the size of the words - AUTOMATIC -> STANDARD -> LARGE -> SMALL. TEXT COLOR : Chose a color for the text - AUTOMATIC ->...
The image sticking effect is influenced by the brightness of a fixed pattern and its display time. It is recommended that you reduce the level of the brightness by using picture controls (See page 30) when a fixed pattern is displayed for a long time. HYUNDAI Digital PDP TV icon buttons to set to ON/OFF .
How to Use the Current Channel Guide Users can get information on broadcasting time and signal status of the current digital channels. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to and press button to select. Press button again to select the “CURRENT CHANNEL Guide”.
- You can schedule only TV programs on the air within 24 hours. This schedule keep updated. For example, if the current time is AM 10:00, any programs you want to schedule is allowed until AM 10:00 next morning. HYUNDAI Digital PDP TV button.
How to Check or Cancel a Scheduled TV Program Users can look through scheduled TV programs or remove a scheduled program from a listing of scheduled programs. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press button to select Press Up and Down buttons to move to “RESERVATION LIST”.
6. Check that the Power button works normally and then check that other function buttons work normally. VCR Setting Number Table HYUNDAI Digital PDP TV button on the remote control, the mode shifts CATV in order. If the Power button works normally but other function buttons do not, repeat the above steps from the beginning.
Glossary 1 Component video Composite video S-VIDEO 480i 480p 720p 1080i Digital television (DTV) HDTV(High Definition TV) SDTV(Standard Definition TV) Cable Broadcast Receiver (Converter) Satellite Broadcasting VHF/UHF Component video is sent through three cables: two color shade (chrominance) signals and one brightness (luminance) signal. Component video achieves greater color accuracy than composite video or S-VIDEO by splitting chrominance into two separate portions.
Page 73
HYUNDAI Digital PDP TV Glossary 2 DVD (Digital Versatile Disc) is an optical disc that can store a huge volume of multimedia such as video, game, and audio application, etc. Coaxial Cable Coaxial cable is the kind of rounded copper cable, which is generally used for TV antenna.
Page 74
Glossary 3 Subwoofer Designed to improve ultra low frequency with about 150Hz. There are active type that is built with a built-in amplifier and passive type that is required to connect an additional amplifier to it. Mono Audio signals are produced through a single channel. It is difficult to experience a spectacular sound since audio signals are reproduced with a single speaker.
LNA is activated. Black and white on some Check other channels for black and white screen. Adjust colour. channels. TV won’t turn on. Ensure the power cord is plugged. Screen is too bright or too Adjust brightness. dark. HYUNDAI Digital PDP TV...
Page 76
Auto On does not work. After setting the time, I turned TV off and turn it on. The programmed information has been erased. Sound Problems Symptom Too much noise occurs. No sound while viewing a cable channel Picture is OK but sound does not come out.
When the inside needs to be cleaned, contact a service center or distribution agent where the item is purchased. It is recommended cleaning is complete before the rainy season. HYUNDAI Digital PDP TV Screen Cleaning Clean the screen with a soft cloth moistened in mild glass detergent and dry with a soft cloth.
(W x D x H mm - With Stand) Weigh (Without Stand) (With Stand) Control type - The above specifications may be subject to change without prior notice. Q421S/Q421H 1EA (A/V audio common) 1EA (Audio included) 2EA (Audio included) 2EA (ANT1+ANT2)
Need help?
Do you have a question about the Q421H and is the answer not in the manual?
Questions and answers