How to Join a Quick scan event
2. Join a Quick Scan event
Once a Quick Scan event has been created by you or
another distributor that has paid for the Quick Scan feature,
you may join that event and begin scanning potential
customers into the system even if you haven't bought the
Quick Scans yourself. To enter an event:
a) Select "Join Event" option.
b) Enter the distributor ID of the person that created the event and
the event name and press "Join Event" on the right hand side.
If you created the event, select the event name listed under the
heading "GO TO MY EVENT" on the left hand side.
c) Next, select whether the person you are about to scan is
a distributor or not.
d) Have the person you are scanning place their finger in the
scanner. Please note that it is important to use the same
finger on subsequent scans in order to ensure an accurate
assessment of the person's antioxidant levels. Placing a
person's finger in the scanner is accomplished by raising the
clamp and having the person place their index finger of their
right hand into the scanning portal and onto the lens. Make
sure that the cradle fits comfortably and smoothly around
the edge of the fingertip so that the finger covers the lens
completely and no light is escaping from around the edge of
the finger
tip.
34
b
c
EN US/CA Version 1.1
Need help?
Do you have a question about the VIEW and is the answer not in the manual?