View Session Check - MonaVie VIEW User Manual

VIeW session Check

To properly place the calibration standard to conduct a
VIeW session Check, follow these simple instructions:
1. Make sure the VIEW scanner is turned on and the warm- ‐
up phase is completed.
1
2. Open the pressure lever (clamp) on the top of the scanner
as you would when performing a normal Life Scan score or
Quick Scan.
3. Place the calibration standard with the white side facing
down and the round end pointing towards the scanner so
that the concave shape on the white side of the reference
tool fits snugly over the VIEW lens.
24
Clamp
2
3
Calibration standard
White side
facing down
Concave shape
fits over the
VIEW lens
Round end
EN US/CA Version 1.1