Memorex MT1136A Service Manual page 12

OSD H
A
2-12: VCO FREERUN
1. Place the set with Aging Test for more than 10 minutes.
2. Receive the UHF.
3. Disconnect the Antenna while receiving the UHF and
set to the Noise screen.
4. Once turn off the Power and turn on the Power again.
5. Approxi. 3 seconds later, input the Antenna again.
6. Connect the digital voltmeter to TP201.
Adjust the L205 until the digital voltmeter is 3.1 ± 0.05V.
7.
ELECTRICAL ADJUSTMENTS
[ TV ]
B
Fig. 2-8
D1-3