LG Air Conditioner Installation Manual page 17

Connecting the Cable to Indoor Unit
1. Cassette type
• Open the control box cover and connect the Remote controller cord and Indoor power wires.
Indoor
power cord
Remote
controller
cord
2. Floor Standing type
Procedure for Connecting the Cable to Indoor Unit, is as follows:
1. Open The Front Door Manually, as shown in Fig. 1.
2. Open the Control Box Cover (A) with Driver, (
3. Connect the Cables (LG doesn't supply) to the terminal Block of Indoor Unit, as shown in
Fig. 3.
4. Install a power supply line or connecting cables as the Fig. 4 in order to prevent the
connecting wires from being cut by sharp edge of the hole.
5. Secure the Control Box Cover (A) to its original position with the help of Driver(
6. Close the Front Door.
(Fig.1)
(Fig.3)
Control box cover
Control box cover screw
) as shown in Fig. 2.
(Fig.2)
Detail Wiring for Indoor Unit
1(L1) 2(L2) 3
To Outdoor Unit
Wiring Connection
A
Installation Manual 17
Lock nut
Conduit
Conduit
mounting
plate
).