Fujitsu Plasmavision P63XHA30WS Service Manual page 14

Model : P63XHA30W
DISPLAY SECTION – LOWER PART
/I power switch
When pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON
can be turned "ON" or "OFF" by the remote control or on the control panel of the display. When pressed while in the "ON
the power indicator lamp goes out and the display is placed in the "OFF" state where power is still partly supplied.
RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
When connecting a cable, attach a ferrite core to the cable.
RGB1 input terminal (RGB1 INPUT/DVI-D)
Connect this terminal to the PC's display (digital RGB) output terminal.
*The connection cable No.88741-8000 made by molex Inc. is recommanded.
RGB2 input terminal (RGB2 INPUT/mD-sub)
Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.
Component video input terminal (VIDEO3 INPUT)
Component video input terminal (VIDEO3 INPUT)
Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.
Video input terminal (VIDEO1 INPUT)
Connect this terminal to the video output terminal of your VCR.
- 13 -
" state, and the power
" state,