General Maintenance; Please Read The Following Carefully - Terratek PTS10U User Manual

Added safety information.
Your machine is supplied with a dust collection bag, for your health and safety always
ensure that the dust bag is fitted, emptied regularly and cleaned. This bag is designed
to collect dust particles up to 5 micron however when cutting some materials dust pa-
rticles can be smaller, again for your health and safety we recommend wearing additi-
onal face dust mask. Always ensure that the bench saw is positioned in on a level st-
able surface without obstruction.

General Maintenance

1. Keep the air vents free from obstruction and clean regularly.
2. Check regularly for any dust particles entering the grills around the motor and the
switch. Use a soft brush to remove any dust particles. Wear safety glasses to protect
your eyes whilst cleaning.
3. Regularly wipe any saw dust from the fence. A buildup of dust on the fence can pr-
event accurate cutting.
4. Monitor the dust bag and empty when approximately half full. Always empty into an
appropriate container. REMEMBER: dust can be hot and cause fire.
5. If the blade has become dirty, use a blade cleaner (not included) to clean it. Dirty
blades will bind more easily, and will more often overheat and burn the wood as it
cuts. Overheated blades dull more easily.
6. If the Blade has become dull, replace it. Dull blades will cause increased tear-out
and ragged edges on the cuts.
7. Lubricate all moving parts at regular intervals.
8. To clean the body of the power tool, only use a soft damp cloth. Do NOT immerse
in water. A mild detergent can be used but NOT petrol or any alcohol based product.
9. After extensive use of this power tool the grease in the gearbox will require replacing.
10. Should the power cord become damaged only allow a fully qualified electrician to
replace or repair.
NOTE: In case of an electrical fault always turn your power tool OFF and disconnect
from the mains electric supply before attempting to diagnose and resolve the problem.

Please read the following carefully

Terratek and/or it's distributor has provided the parts list and assembly diagram as a
reference tool only. Neither Terratek or it's distributor makes any representation or
warranty of any kind to the buyer that he or she is qualified to do any repairs or replace
any parts of this product. Terratek and it's distributor expressly state that all repairs or
parts replacement should be done by certified or licensed technicians. The buyer
assumes all risk and liability arising out of his or her repairs or parts replacement to the
original product.
13