Introduction & Specifications - Magnum 6500 Owner's Manual

DEAR VALUED MAGNUM 7500 OWNER,
We appreciate your decision to help preserve our precious environment by purchasing the Magnum 6500
or the 7500 Corn/Wood Pellet Furnace. With everyone working together, we can have clean air and
renewable heat for our homes. Making a decision today to conserve energy will result in lower energy
costs tomorrow along with conserving our precious natural resources.
Please read this Owners Manual carefully before using this appliance and if you have any questions
contact your local Magnum reseller. We appreciate your business and wish you many warm days and
nights with your new Magnum 6500/7500 Corn/Wood Pellet Furnace.
Sincerely,
Mike
Mike Haefner, President
American Energy Systems, Inc.
P.S. You are very important to the success of our business and your referral of our products is very much
appreciated. Many of our Resellers have referral rewards available and I encourage you to ask your local
dealer how to get involved in helping make our country energy self-sufficient. GOOD LUCK !
SPECIFICATIONS
American Energy Systems, Inc., manufacturer of the Magnum 6500/7500 Corn/Wood Pellet Appliances, reserves
the right to alter its products, their specifications and/or price without notice.
Safety tested by Warnock Hersey to UL 391-99, CAN/CSA-B366.1-M91,
Heat Input*
Fuel Storage Capacity
Width
Height with Pedestal
Depth (includes ash lip)
Shipping Weight
Electrical Requirements
Flue Size (rear exit)
Warm Air Outlet
Room Air Blower
Cold Air Return
Filter Size
Overall unit efficiency
Total Amp. Draw
*BTU input can vary from 10-60 percent, depending on the brand of fuel, size of fuel, quality of fuel and moisture content. Improper
installation, venting configuration, combustion air configuration and maintenance practices will seriously decrease the heating ability of
this appliance. Consult your authorized Magnum reseller for information to get the best results out of your Magnum appliance.
7500 = up to 78,000 BTU/hr with corn
6500 = up to 78,000 BTU/hr with corn
180-210 Lbs.
26"
47 ½"
36"
480 pounds (7500), 560 pounds (6500)
115 volts – 60 cycle – 10 amp Circuit
4" Type L Corn/Pellet Vent
12" Round or 14" x 14" rectangular
1240 CFM furnace blower
14" x 24"
16 x 25"
As high as 78%
Full load = 9 amp.
3