Cd/Dvd Operation; Playing A Disc; Pausing Playback (Still Mode); Stopping Playback - Technika LCD15DVDID-107 Owner's Manual

CD/DVD OPERATION

This owner's manual explains the basic instructions of this unit. Some DVDs are produced to limited operation
during playback. For example, many DVDs do not allow users to skip government warnings, or in some cases
previews or other features. This is not a defect in the unit. Refer to the instruction notes of discs.
" " may appear on the screen during operation. A "
by the unit or disc.

PLAYING A DISC

1. Press the STD.BY/ON button (on unit or remote control) to turn on the unit.
2. Press the FUNCTION button to select DVD mode.
See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 3.
3. Press the PUSH OPEN button to open the disc door.
4. Hold the disc by its sides and carefully press onto the central support of compartment with
the printed side facing towards you until you hear a "click".
5. Push the Disc Tray to close the disc door.
It takes a short while for your unit to load the disc. After loading, the unit will automatically
either bring you to the main menu of the DVD, or start playing the DVD. If the unit does not
automatically start playing the DVD, press the

PAUSING PLAYBACK (STILL MODE)

Press the PAUSE button. To resume normal playback, press the
press the PAUSE button, the picture advances one frame.

STOPPING PLAYBACK

Press the STOP button at the location where you want to interrupt playback. To resume
playback at the position where the disc was stopped, press the
If you press the STOP button twice, the unit's memory will be cleared and pressing the
PLAY button will reset the disc to the beginning.

TO SKIP TO A DIFFERENT TRACK

• Press the PREV button repeatedly to skip to the start of the current or previous track.
• Press the NEXT button to skip to the next track.
• For audio CD disc, use the number buttons (remote control only) to jump straight to that track
number.

FAST FORWARD/FAST REVERSE

1. Press the SEARCH
• The disc begins fast scan at x2 speed.
• Four speeds are available. Each time SEARCH
speed of fast scan changes in the following sequence:
2. Press the PLAY button when you reach the desired point to resume playback at normal
speed.
SLOW-MOTION PLAY (DVD)
1. Press the SLOW button on remote control in the play mode. Six speeds are available. Each
time the SLOW button is pressed, the speed of slow-motion playback changes in the
following sequence:
2. Press the PLAY button to return to the normal playback speed.
26-36-1.pmd
" means that the desired operation is not permitted
or SEARCH button when a disc is playing.
X 2 X 4 X 8
- 26 -
26
PLAY button.
PLAY button. Each time you
PLAY button.
or SEARCH button is pressed, the
X 20
23/08/2007, 10:42