Safety Precautions - Technika LCD15DVDID-107 Owner's Manual

SAFETY PRECAUTIONS

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO
NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME
OR EQUIVALENT TYPE.
CAUTION
INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM
CLASS 1 LASER PRODUCT
PLACEMENT INFORMATION
• Do not use this unit in places which are extremely hot, cold, dusty, or humid.
• Place the unit on a flat and even surface.
• Do not restrict the air flow of this unit by placing it somewhere with poor air flow, by covering it with a cloth, or by
placing it on bedding or carpeting.
• Under the environment with radio frequency interference, the picture may be influenced.
SAFETY INFORMATION
• When connecting or disconnecting the cord, grip the plug and not the AC cord itself. Pulling the cord may damage
it and create a hazard.
• When you are not going to use the unit for a long period of time, disconnect the AC cord.
• The mains plug is used as the disconnecting device. It shall remain readily operable and should not be obstructed
during intended use. To be completely disconnected from the supply mains, the mains plug of the apparatus should be
disconnected from the mains socket outlet completely.
• When the signal lamp LED is off, it indicates that the apparatus is completely disconnected from the mains.
• The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should
be placed on apparatus.
• To be completely disconnect the power input, the mains plug of apparatus shall be disconnected from the mains.
• The mains plug of apparatus should not be obstructed OR should be easily accessed during intended use.
• Leave a minimum of 200mm around the apparatus for ventilation, and 200mm beside the DVD mechanism;
• The ventilation openings should not be impeded by covering with items such as newspaper, table-cloths, curtains etc.
• No naked flame sources such as lighted candles should be placed on the apparatus;
• Attention should be drawn to the environmental aspects of battery disposal;
• The use of apparatus in moderate climates.
• Under the influence of electrostatic phenomenon, the product may malfunction and require user to power reset.
CONDENSATION INFORMATION
• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the unit.
When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1-2 hours before
turning the power on, or gradually heat the room and let the unit dry before use.
RATING PLATE LOCATION
• The rating plate is on the back of product.
NOTES ON COPYRIGHT
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted material without
permission.
Apparatus Claims of U.S. Patent Nos. 4,907,093; 5,315,448; and 6,516,132 licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
WARNING:
Should any problems occur, disconnect the AC cord and refer servicing to a qualified technician.
2-12-3WO-1.pmd
- 2 -
2
The lightning flash with an arrowhead within
a triangle alerts you to uninsulated
dangerous voltage within the product's
enclosure that could cause an electric shock.
The exclamation point within a triangle alerts
you to the presence of important operating,
maintenance and servicing instructions in
this user's manual.
The symbol for Class II
(Double lnsulation)
This symbol means that
the unit complies with
This product
European safely and
contains a low
electrical interference
power laser device.
directives.
22/08/2007, 17:00