Connecting Multiple Units - Solar Arc Smartpool S204 Installation And Instruction Manual

Figure 1
Figure 9
Multi-Unit Installation
Multiple Arcs can be connected in series for larger pools or to increase the heat output. The installation for several Arcs
is the same for a single panel with the exception of having to connect the panels together prior to connecting the panels to the pool.
Two Panel System:
1) Place the rubber hose connector on the header labeled "TO POOL" on the first Arc.
2) Slide (2) hose clamps onto the rubber hose.
3) Place the second Arc next to the first Arc so that the header labeled "FROM POOL"
is next to the rubber hose.
4) Insert the header into the rubber hose and secure the connection with the hose
clamps (Figure 13).
5) Follow instructions 2-13 above to connect the system to the pool.
NOTE: More than 2 systems can be connected, repeat instructions 1-4 in this section
if more panels are being ganged together.
(732) 730-9880
Figure 5
Figure 2
Figure 6
Metal Stake
4
Figure 3
Figure 7
Metal Stake
Figure 4
Figure 8
Figure 12