Advertisement
Telephone Operation
Make a call
1. Lift the handset from the base.
2. Dial the number.
3. Return the handset to the base to hang up.
Answer a call
1. Lift the handset from the base when the telephone rings.
2. Return the handset to the base to hang up.
Redial
Lift the handset and then press redial to call the last dialed
number (maximum of 32 digits).
Flash
Press the flash button to use custom calling services such as
call waiting or call transfer. Custom calling services are provided
by your telephone service provider.
Receiver Volume
The listening volume can be adjusted to 3 different levels by
adjusting the receiver volume switch.
= low
= medium
= high
Ringer Volume
The ringer volume can be adjusted to 3 different levels by
adjusting the ringer volume switch.
= silent
= low
= high
5
Troubleshooting Tips
Problem
Cause/solution
No dial tone.
• Check installation: make sure the
telephone line cord is connected to the
handset and a modular phone jack (RJ-
11).
• Try disconnecting and reconnecting
the line cord into the handset to ensure
proper connection.
• You must have touch-tone service on
your line to use this phone. If you do not
know what type of service you have,
check with your telephone service
provider.
• Unplug the telephone line cord, wait for
30 seconds, and plug the phone back in.
• Connect another phone to the same
modular jack; if the second phone does
not work, the problem might be with your
wiring or local service.
• Place the handset on the base for at
least 20 seconds.
Phone does not
• Make sure the ringer volume switch is
ring.
not set to silent.
• You may have too many extension
phones on your line. Unplug some
extension phones.
• Check for a dial tone. If there is no dial
tone, see solutions for No dial tone.
6
Problem
Cause/solution
Cannot be heard
• Make sure the telephone line cord is
by other party.
securely plugged in.
• Make sure extension phones are not in
use at the same time you are using the
phone. It is normal for the volume to drop
when additional extension phones are
used at the same time.
General Product Care
• Avoid placing the phone near heating appliances and
devices that generate electrical noise (for example, motors or
fluorescent lamps).
• Avoid dropping the phone and other rough treatment.
• Clean the phone with a soft cloth.
• Never use strong cleaning agents, paint thinner, abrasive
powder, alcohol, or other chemical products to clean the unit.
• Retain the original packaging in case you need to ship the
phone at a later date.
• DO NOT expose to direct sunlight or moisture.
CAUTION: Disconnect the phone cord from the wall outlet before
installing or replacing the batteries.
• Never install telephone wiring during a lightning storm.
• Never touch un-insulated telephone wires or terminals,
unless the telephone line has been disconnected at the
network interface.
• Install or modify telephone lines with caution.
• Never install a telephone in a wet or damp location.
7
Environment
Used equipment must be disposed of in compliance with
current environmental protection regulations. You should
return it to you reseller or dispose of it in an approved
recycling center.
CAUTION
WARNING: TO PREVENT
RISK OF ELECTRICAL SHOCK, DO NOT OPEN
FIRE OR ELECTRICAL
THE LIGHTNING
CAUTION: TO REDUCE THE
SHOCK HAZARD, DO
FLASH AND ARROW
RISK OF ELECTRICAL SHOCK,
HEAD WITHIN
DO NOT REMOVE COVER (OR
NOT EXPOSE THIS
THE TRIANGLE IS
BACK). NO USER SERVICEABLE
PRODUCT TO RAIN OR
A WARNING SIGN
PARTS INSIDE. REFER
ALERTING YOU
SERVICING TO QUALIFIED
MOISTURE.
OF "DANGEROUS
SERVICE PERSONNEL.
VOLTAGE" INSIDE
THE PRODUCT.
8
THE EXCLAMATION
POINT WITHIN
THE TRIANGLE IS
A WARNING SIGN
ALERTING YOU
OF IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
Advertisement
