Table of Contents
Advertisement
A-B Repeat Playback
You can repeatedly play back a designated section
of a CD.
1. Press the REPEAT A-B button at the beginning
of desired part.
• 'RPT A' will be displayed.
2. Press the REPEAT A-B button at the ending of
desired part.
• 'RPT AB' will be displayed.
3. To cancel REPEAT A-B function, press the
REPEAT A-B button again.
• 'OFF' will be displayed.
➣
REPEAT A-B function is available within a track.
10 Skip Function
Press the +10 or -10 button while in playback mode.
This will skip the tracks as many as 10 or -10 from
the current track.
CD Programming
This function is not available during playback of an
MP3/WMA-CD.
• You can program the playback order of up to 24
tracks of your choice.
• However, you must stop playing the CD before
selecting tracks.
1. While in CD playback mode, press the STOP(@)
button to stop playing the CD.
(
2. Press the ENTER
message below:
(01= program number, --= track number)
3. Use the [ or ] button to move to a desired
track.
• Press [ to move to the previous track.
• Press ] to move to the next track.
(
4. Press the ENTER
selection, the selection is stored and
is displayed.
5. To select a different track, following the steps 3
to 4 above.
6. Press the PLAY (+) button to play the
programmed tracks.
7. Press the STOP(@) button to stop playing the
programmed tracks, Press the STOP (@) button
again to cancel playing the programmed tracks.
• If you open the disc tray or turn off the
product, your programming will be canceled.
)
button to display the
)
button to confirm your
Checking or Editing the
Programmed Tracks
You can check a list of programmed tracks and
edit them as you want.
1. If a programmed track is being played, press the
STOP (@) button once.
(
2. Press the ENTER
the message below:
(C=Check, 01= program number)
➣
If a total of 24 tracks are already pro-
grammed, "C" will be displayed rather
than "P" in the display.
3. Repeat pressing the ENTER
the desired track is displayed.
4. Press the [ or ] button to select a different
track.
(
5. Press the ENTER
selection.
6. To play the programmed tracks, press the
PLAY (+) button.
Auto Change Function
You can circularly play between the disc and the
USB.
1. Press the AUTO CHANGE button on the main
unit.
Each time press this button, the mode will switch as
following:
AUTO CHANGE OFF ; AUTO CHANGE ON
• When the auto change mode is "ON", the music will
be played on DISC
• When the auto change mode is "ON", if you press
the POWER button, function change button or the
OPEN/CLOSE button, the auto change function
automatically switches to "OFF" mode.
• When USB is playing, if you disconnected the USB,
the auto change function automatically switches to
"OFF" mode.
• When the auto change mode is "ON", the recording
can't work.
• When the auto change mode is "ON", the REPEAT,
SLEEP function can't work and automatically changes
to OFF.
• When the auto change mode is "ON", the USB REC,
REPEAT, PROGRAM, DELETE and SLEEP function
can't work.
• When the DISC plays end, if there's no USB, it will still
play the DISC music.
• When the USB plays end, if there's no DISC, it will still
play the USB music.
)
button twice to display
(
)
button until
)
button to confirm your
USB continuously.
➝
English
English
9
8
Hide quick links:
Advertisement
Table of Contents
