Performing Initial Setup Operations - Sony STR-DB940 Operating Instructions Manual

Performing Initial Setup Operations
Once you have hooked up the speakers and turned on the
power, clear the receiver's memory. Then specify the
speaker parameters (size, position, etc ) and perform any
other initial setup operations necessary for your system
* ,
, i " m,, '
,"_A. "i ,.
"
Make sure that you have:
l
Turned MASTER VOLUME to the leftmost position (0)
l
Selected the appropriate front speakers (see "m
SPEAKERS selector" on page 30)
_:_/
,"
Before using your receiver for the first time, or when you
want to clear the receiver's memory, do the following
This procedure is not necessary if the demonstration
activates when you turn the power on
I/O
1
Turn off the receiver.
2
Hold down I/C!l for 5 seconds
The currently selected function, followed by the
demonstration message appears in the display All of
the
following items are reset or cleared:
l
All preset stations are reset or cleared
l
All sound field parameters are reset to their factory
settings
l
All index names (of preset stations and program
sources) are cleared
l
All adjustments made with the SET UP button are
reset
to their factory settings
l
The sound field memorized for each program source
and preset stations are cleared
Before using your receiver for the first time, use the SET
UP button to adjust the setup parameters so that they
correspond to your system You can adjust the following
items For details on how to make adjustments, see the
page in parenthesis
l
Speaker size and placement (pages 19-22)
l
Speaker distance (page 19)
l
Whether other components will turn on or off
automatically via the CONTROL Al II control system
(page 53)
l
Whether the display turns off or not when you press
DIMMER (page 54)
l
STR-DB940 only:
- 2 way remote control system operation (page 53)
- Selecting the color of the on-screen display (page 54)
- Select the TV color system of the monitor (except for
models of area U, CA) (page 54)
Demonstration Mode
The demonstration will activate the
first time you torn on
the Power When the demonstration starts, the following
message appears in the display twice:
"Now Demonstration Mode!! To finish the
demonstration, please push POWER KEY while this
message appears in the display. Thank you!"
To cancel the demonstration
Press I/C!) to turn the receiver off during the previous
message The next time you turn the receiver on, the
demonstration will not appear
To view the demonstration
Hold down SET UP and press I/& to turn on the power
Note
Running the demonstration will clear the receiver's
memory. For details on what will be cleared, see "Clearing
the receiver's memory" on this page
18